Auto window roll-up on aftermarket alarm
#1
Rookie
Thread Starter
Auto window roll-up on aftermarket alarm
Newbie here, anyone ever get this working?
I got a factory Pyle alarm that was already installed when I purchased. Got it working great and even connected the trunk pop.
Was looking into installing the window roll up module to roll all windows up after arming the alarm. Watched some Youtube videos on how to do it and it looked pretty straight forward so I order a module from Amazon.
Anyone do this with their windows yet? I would love to know which wires to clip and to connect the module.
Need the 12v constant, ground, ignition and window switch wires to and from the master switch (driver side) and the passenger side wire colors.
THANKS!
I got a factory Pyle alarm that was already installed when I purchased. Got it working great and even connected the trunk pop.
Was looking into installing the window roll up module to roll all windows up after arming the alarm. Watched some Youtube videos on how to do it and it looked pretty straight forward so I order a module from Amazon.
Anyone do this with their windows yet? I would love to know which wires to clip and to connect the module.
Need the 12v constant, ground, ignition and window switch wires to and from the master switch (driver side) and the passenger side wire colors.
THANKS!
Last edited by ESCEE400; 11-18-22 at 11:35 AM. Reason: alignment
#2
Pole Position
Hello,
Why do you need an aftermarket alarm system in your Lexus? The OEM system is already quite descent, having all the functionality you need, one of its features is an ability to raise all the windows by turning the key in a door lock to the "Lock" position for a few seconds.
If you really want to, you can make a simple time delay circuit that will short the switch on the door lock to raise all the windows, but those kinds of retrofits often end up causing a lot more trouble in the future than what they actually save.
Hope this helps and best of luck!
Why do you need an aftermarket alarm system in your Lexus? The OEM system is already quite descent, having all the functionality you need, one of its features is an ability to raise all the windows by turning the key in a door lock to the "Lock" position for a few seconds.
If you really want to, you can make a simple time delay circuit that will short the switch on the door lock to raise all the windows, but those kinds of retrofits often end up causing a lot more trouble in the future than what they actually save.
Hope this helps and best of luck!
#3
Rookie
Thread Starter
I didn't really need the alarm but the old owner had one already installed which in turn disabled the factory keyless remote and I didn't know how to re-enable it.
Does that key initiated window roll up work in 1993s?
Does that key initiated window roll up work in 1993s?
#4
Pole Position
Only one way to find out..
Hope this helps and best of luck!
#7
Pole Position
Sorry for luring you into this idea before checking.
Hope this helps and best of luck!
Trending Topics
#9
Rookie
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
Djdot2k
SC400 / 300 Classifieds
12
01-29-09 08:41 AM