SC300 1jz swap emissions results in Texas
So I went today thinking I may have an issue with my emissions results. Well turns out the car passes with no problems.
Just thought I would post up the results if anyone was wondering. A stock swapped 1JZGTE will pass no problem. Let me know if there are any weird numbers that you see. If you do see some tell me what could possibly cause it and what I can do to fix it if it is a problem. http://i427.photobucket.com/albums/p...c/ddb04bca.jpg http://i427.photobucket.com/albums/p...c/9c3dbaa1.jpg |
Looks ok, but the low speed emission results says 500rpm...mine use to stick around 750 before the various throttle sensors went to hell. Is idle at 500rpm normal for a 1jz?
|
Originally Posted by Tabaka
(Post 6375083)
Looks ok, but the low speed emission results says 500rpm...mine use to stick around 750 before the various throttle sensors went to hell. Is idle at 500rpm normal for a 1jz?
|
Idle is about 750-800 rpm on a stock 1jz.
|
Apparently you have an ES300. :p
|
Too bad Califonia will pop my hood :eek2:
|
1JZ swapped in a ES300? Texas doesnt do a visual and function test? Looks like they tested it TSI(Two Speed Idle test) test where they didnt put a load on it to test NOx.
Here in CA, in Enhanced area(highly populated areas) we run loaded tests on a dynamometer if your vehilce is 2WD. This test simulates vehicles driving on roads and checks for NOxs which is a pollutant that causes smog. All the swapped 1JZs that I sniff on the analyzer comes out LEAN and NOxs are sky high. I would think oppisite cause the car has poor gas mileage and smells rich. |
I didn't think JDM engines could pass emissions? There was a topic about it once and everyone said a JDM 1JZ/2JZ SC couldn't pass emissions.
That's good to see you passed with no trouble. |
Originally Posted by ThomasGS4
(Post 6375218)
Apparently you have an ES300. :p
My car has the stock sc300 cat and exhaust. It does how ever have magnaflow mufflers and that is it. I have no mods to the motor other than one intercooler hard pipe and Apexi BOV. I really wanted people to see the results if a stock emissions test. This can help everyone to realize that these cars are capable in stock for of passing. |
Originally Posted by eyeSOARER6
(Post 6375280)
1JZ swapped in a ES300? Texas doesnt do a visual and function test? Looks like they tested it TSI(Two Speed Idle test) test where they didnt put a load on it to test NOx.
Here in CA, in Enhanced area(highly populated areas) we run loaded tests on a dynamometer if your vehilce is 2WD. This test simulates vehicles driving on roads and checks for NOxs which is a pollutant that causes smog. All the swapped 1JZs that I sniff on the analyzer comes out LEAN and NOxs are sky high. I would think oppisite cause the car has poor gas mileage and smells rich. |
How do they conduct those emissions tests in GA... Im very curious because who knows if i will move there with my 400 w a 1j swap in it... Thank god in florida we dont deal with emissions... For now atleast...
|
I passed mine with a 1jz and with no cats in Oregon.
|
Originally Posted by meangreen1
(Post 6433701)
I passed mine with a 1jz and with no cats in Oregon.
|
I had to buy a new cat to pass in colorado. I tried everything i could think of before i bought the new cat. Should have just got that first, that is the ultimate key in order to pass within a state with strict emissions.
|
Originally Posted by Anthony85
(Post 6433455)
How do they conduct those emissions tests in GA... Im very curious because who knows if i will move there with my 400 w a 1j swap in it... Thank god in florida we dont deal with emissions... For now atleast...
And everything passed fine but my NOx was through the ROOF. |
All times are GMT -7. The time now is 06:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands