Hey 1JZ guys what kinda power you putting down?
06-27-12, 07:44 PM
#68
Driver
iTrader: (1)
Join Date: Dec 2011
Location: Montreal
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
when i got the car the previous owner said 520 hp 480 torque on 14 pounds stock twin and im an oem r154, havent dynoed it so i cant reallt tell you if he is accurate but when i push it sure feels like it lol
06-27-12, 07:49 PM
#69
Lexus Test Driver
iTrader: (1)
Join Date: Dec 2008
Location: fl
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
If so I call serious foul and sorry to take the wind out of your sails.
Stock 1j twins 14 #'s around 290 to 310 hp and you will be smacking the BC if no FCD.
Sorry.
06-27-12, 11:31 PM
#71
Pole Position
Join Date: May 2011
Location: CA
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
swappp
you can do both.. while you at it.... 2jzge bottom end and 1jz head and electronics... you get the best of both jz world...
06-28-12, 06:29 AM
#75
not that im wanting to blow up my 1jz. but now that i've established my setup.
they put them there for a reason. just like the old 4A-GE blocks added oil squirters in 1988 blocks up to the 1992.
swapping over short blocks to a 2jzgte will be cake. the compression is lower than a GE as well. and lastly im not running a long oil line from the oil filter housing all around to the turbo. it looks dumb.
and easier to source parts for 2jz
they put them there for a reason. just like the old 4A-GE blocks added oil squirters in 1988 blocks up to the 1992.
swapping over short blocks to a 2jzgte will be cake. the compression is lower than a GE as well. and lastly im not running a long oil line from the oil filter housing all around to the turbo. it looks dumb.
and easier to source parts for 2jz
Last edited by DoomLight; 06-28-12 at 06:36 AM.