Devor

iTrader: (1)

Hey guys my ride did'nt pass smog and I was told I need a new cat. Has anyone replaced there's themselves? I've been looking for a new one online but have only found (weld) only replacements I wonder if they have any bolt on's available or if I should just take it to the shop

Triple C

iTrader: (2)

I failed emissions 3 time and am still trying to get it to pass also. Yes a cat is easy to complete if you have a sawsall and a welder. Just buy a Cheap cat that is for the exhaust size you have and pay a shop to weld it in right. It should be about 50$ to weld it in. Mine did 3 days ago.

PEARL2

iTrader: (4)

I have a new right side stock fitment f/s. Pm me if you're interested.

Devor

iTrader: (1)

I have'nt checked yet but when I looked up buying a new cat there is a rear and a front? I thought most cars has just 1 does the SC300 have 2 cats because it is a dual exhaust????

maceugood

iTrader: (4)

I got one going bad also. Im gonna replace both rears with magnaflows, they are 200 apiece, lexus qouted me 1400 each. guy at shop is telling me I should delete front cats and replace rears.

Devor

iTrader: (1)

so there are 2 cats? I saw them online, magnaflows both front and rear for $178.14 If I can just find a shop that will weld the new one's on for like 100 bucks Id be estatic I wanna get my ride on the street this is so annoying watching it just sit in my driveway

RockRash

i thought that you could delete the rears but had to keep the one up front or the cel came on

Devor

iTrader: (1)

These 2 links are for a front and rear magnaflow cat both for only 180.00$ shipped I just called the shop and they can do the swap for 150 so new cats installed for un 350$ not bad I guess.. I just want to make sure these will fit and will be good for california emissions? the site says there 50 state legal just wanna make sure Im doing the right thing.. thanks guys

MAGNAFLOW CATALYTIC CONVERTER -- 50-state legal; 3-way catalyst style; 2.25 in. inlet; 2.25 in. outlet; Single inlet and outlet configuration; 9 in. body length, 6.5 in. width, 13 in. overall length; Ceramic honeycomb catalyst substrate; Oval stainless steel casing; The main benefit of this catalytic converter is that one unit may cover a wide variety of vehicle makes and models; Installing this converter often requires the use of welding, cutting, and tube bending equipment that is readily available to most professional installers.

MAGNAFLOW CATALYTIC CONVERTER -- 50-state legal; 3-way catalyst style; 2.25 in. inlet; 2.25 in. outlet; Single inlet and outlet configuration; 9 in. body length, 6.5 in. width, 13 in. overall length; Ceramic honeycomb catalyst substrate; Oval stainless steel casing; The main benefit of this catalytic converter is that one unit may cover a wide variety of vehicle makes and models; Installing this converter often requires the use of welding, cutting, and tube bending equipment that is readily available to most professional installers.

It just says theres a front and rear so Im guessing there are 2 on our stock exhaust sytems???