What did you do to your SC today?
10-01-17, 08:10 AM
#6874
I hope you used that opportunity to clean the back of the wheels too.
Test fit some 19x11 +19 in the rear for fun. The wheels are 5x112, so that's why the car is still lifted instead of being lowered. These specs would be able to fit with a bigger stretch and around -5 degrees of camber in the rear.
Test fit some 19x11 +19 in the rear for fun. The wheels are 5x112, so that's why the car is still lifted instead of being lowered. These specs would be able to fit with a bigger stretch and around -5 degrees of camber in the rear.
10-02-17, 09:01 PM
#6877
There are 3 options:
1. Redrill, but this doesn't always work because of the bore of the lug nut holes might prevent a socket from seating for 5x114.3
2. Adapters
3. PCD variation nut aka "wobble nuts" which are good for a 2mm difference, but these also have the same limitations as option 1.
1. Redrill, but this doesn't always work because of the bore of the lug nut holes might prevent a socket from seating for 5x114.3
2. Adapters
3. PCD variation nut aka "wobble nuts" which are good for a 2mm difference, but these also have the same limitations as option 1.
10-03-17, 12:18 AM
#6879
Driver School Candidate
Received the LS400 fan pulley bracket today, tracking down the pulley itself tomorrow, so the install of my new radiator and electric fans can get finished up. And I'm going to try to find the LS400 brakes while I'm out and about tomorrow.
