When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not today, but yesterday I bought, cleaned and painted ls400 bbk with purple luscious metal cast duplicolor rattle tat tat tat and, waiting on the my hoes to come in
rockauto sent me the tie rod ends can someone besides me confirm that these are wrong?
now pic time
Not sure about the tie rod ends, but those calipers look amazing!
BIG BRAKES are looking GREAT!!! I just found a pair from a 98 donor. Going to pick up around 12:00 for $80. Then take them back to the house for preping.
My SC is black on black. Any suggestions on what color I should use to paint them?
BIG BRAKES are looking GREAT!!! I just found a pair from a 98 donor. Going to pick up around 12:00 for $80. Then take them back to the house for preping.
My SC is black on black. Any suggestions on what color I should use to paint them?
Thanks!
My sc is black on black too, I bought a can of orange vht flame proof rattle, then took it back thinking orange on black is going to look hideous and got the purple irkle glad I did cuz you guys like it too!!!
I bought the tie rod ends separately from the rack. The re-manufactured rack will only come with the inners. After looking over my old rack, I probably didn't need new ones. What makes you think the tie rod end is wrong?
after looking at them and comparing to the extra rack I have sitting here, one of them is bent differently than the other, I don’t know if it matters, but I was hoping it’s the same exact piece, I’ll try to take a pic for comparison later, where did you get your. Aftermarket rod ends If you don’t mind me asking?
Thanks!!
after looking at them and comparing to the extra rack I have sitting here, one of them is bent differently than the other, I don’t know if it matters, but I was hoping it’s the same exact piece, I’ll try to take a pic for comparison later, where did you get your. Aftermarket rod ends If you don’t mind me asking?
Thanks!!
I bought moog ones from amazon. The part numbers are all in my build thread if you want to look it up. I didn't see any advantage in running an aftermarket tie rod end like battle version. Although, I am considering the figs engineering ones that has spacers to level out the rack on a lowered car.
I see what you mean now, the tie rod end on the top of your picture looks different. I took a picture of my tie rod ends this morning for you to compare.
BIG BRAKES are looking GREAT!!! I just found a pair from a 98 donor. Going to pick up around 12:00 for $80. Then take them back to the house for preping.
My SC is black on black. Any suggestions on what color I should use to paint them?
Originally Posted by LEXXIUM
Thanks!
My sc is black on black too, I bought a can of orange vht flame proof rattle, then took it back thinking orange on black is going to look hideous and got the purple irkle glad I did cuz you guys like it too!!!
I think the LS400 BBK caliper color is purely a personal choice and whatever you go with will be fantastic. Not sure if you have thought about it but here is a link for a vendor that provides decals... (rounded or straight...this the link direct to the straight versions - with several colors to select from depending on your main color...).
Put my engine and transmission back into rightful place.. took hours and was a pita but now my car is almost coming back alive as that was the most hardest part~
Put my engine and transmission back into rightful place.. took hours and was a pita but now my car is almost coming back alive as that was the most hardest part~
well done. how were the old engine mounts? did you purchase new mounts?
I finally got an alignment done on my SC. I'm waiting to hear back from my guy on how bad it was before. It's been over seven years since I've last gotten one.