Relapser

to the top??? still wanting advice

x and o

JDMmuscle

iTrader: (9)

wtf? Yankee?

vegas_sc4

iTrader: (1)

It's easy. Takes all of 5mins.

Here's a pic before I unplugged the small led inside

ScBouncE

i believe there was another thread about this, was wondering the same an came across it

RukusSC300

WOHOA WHOA WHOA!1!....What front bumper is that?!!?....Is that a stock 97+ front Bumper? if it is y does it look so crazy on that car

mrlextasy

iTrader: (1)

WHAT THE BLOODY WANKA IS A YANKEE LOL THIS whole convo made my head hurt man shw me a picture of your car and show my once again what you want cuz now ur talking abut bumpers and amber and yankee city lights and wtf is a yankee once again lol

uras300

iTrader: (2)

Read this thread. It has all the info to use blinker as city light while retaining blinker function.

https://www.clublexus.com/forums/sc-...n-signals.html

pieisgude

iTrader: (2)

Are you talking about doing this?

DFab

iTrader: (4)

Judging by the pictures, I think hes talking about the turn signals. And I have thought about doing this too. I first noticed that my turn signal takes an amber 1157, when I had a bulb go out. But its only wired for one function. However I also noticed a small rubber plug that would normally be a wire for "parking lights". I will take some picture today sometime. It looks to me that it just needs to be wired and it should work. I'm thinking robbing power from the city light on each side. It should be a one wire hook up. Only thing I see being a bit problematic is finding the right terminal that clips into the socket. If this all works like I'm thinking it would be a very factory looking mod. Again I will be sure to take a few pictures today.

horent135

iTrader: (10)

I think OP is asking that he want his turn signal to have a constant power like the "city light" but still have the same function. When the car turns, it blinks, otherwise it still powered on.

BTsunami

Well when you figure it out make a diy; it seems like many people would dig it. I would as well, good luck

Luxor

iTrader: (15)

Buy a dual filament bulb for the turn signals.

SC51

iTrader: (3)

Answers have been covered already in the thread, swap wires from city to turn signal, or get Integra sockets or ones that u can use a dual filament bulb so you can have turn/city. Some of you CL guys get confusing. Keep it simple

vegas_sc4

iTrader: (1)

The turn single bulb is already a dual one. Jus wire power to the port that's blocked with the rubber. It's not hard at all.

DFab

iTrader: (4)

^ Exactly!