Notices
SC - 1st Gen (1992-2000)

Camber Correction kit

Thread Tools
 
Search this Thread
 
Old Sep 22, 2010 | 04:31 PM
  #1  
Toastt's Avatar
Toastt
Thread Starter
Pole Position
 
Joined: Aug 2009
Posts: 251
Likes: 0
From: Florida
Default Camber Correction kit

Does anyone know of any cheaper camber correction kits other than the Diazen one? I need to correct my **** and I can't spend a lot because I just got laid off and I'm living off that unemployment check. The Daizen kit is 130 for the front and 130 for the rear
Reply
Old Sep 22, 2010 | 07:05 PM
  #2  
chnk's Avatar
chnk
Lexus Test Driver
iTrader: (12)
 
Joined: Jan 2010
Posts: 1,348
Likes: 8
From: GA
Default

raise the car for now if you can, your tires wont wear away as quickly raised
Reply
Old Sep 22, 2010 | 08:43 PM
  #3  
ClearP's Avatar
ClearP
Lead Lap
 
Joined: Sep 2010
Posts: 680
Likes: 0
From: CA
Default

I thought stock SC can be corrected quite a bit already?
Reply
Old Sep 23, 2010 | 02:13 AM
  #4  
snakehead's Avatar
snakehead
Intermediate
iTrader: (1)
 
Joined: Nov 2009
Posts: 424
Likes: 5
From: ca
Default

The Daizen one is back ordered , If you find another one let me know.
Reply
Old Sep 23, 2010 | 03:24 AM
  #5  
Toastt's Avatar
Toastt
Thread Starter
Pole Position
 
Joined: Aug 2009
Posts: 251
Likes: 0
From: Florida
Default

Originally Posted by ClearP
I thought stock SC can be corrected quite a bit already?
Not when you're as low as me
Originally Posted by snakehead
The Daizen one is back ordered , If you find another one let me know.
Where are you trying to order yours from?
Reply
Old Sep 23, 2010 | 11:44 AM
  #6  
ClearP's Avatar
ClearP
Lead Lap
 
Joined: Sep 2010
Posts: 680
Likes: 0
From: CA
Default

How low are you? I have a set that I'm using but I thought I didnt need it actually lol
Reply
Old Sep 23, 2010 | 12:38 PM
  #7  
GEZUP's Avatar
GEZUP
Driver
iTrader: (2)
 
Joined: Feb 2010
Posts: 122
Likes: 1
From: FL
Default

I am looking for a camber correction kit too... Daizen have been on back order for over 6 months. At least thats what they tell me. I email them almost every month to see if they have any in stock. I have heard that they no longer make them. But again - I heard that so take it for what it's worth... Are there any other companies that make the kit?
Reply
Old Sep 23, 2010 | 02:24 PM
  #8  
Han7's Avatar
Han7
Rookie
 
Joined: May 2010
Posts: 78
Likes: 0
From: WA
Default

raise it up for now

Titan motorsports and jic have what you need but you need to save up a few bills
Reply
Old Sep 23, 2010 | 02:32 PM
  #9  
kwg's Avatar
kwg
Lead Lap
iTrader: (1)
 
Joined: Dec 2008
Posts: 671
Likes: 0
From: San Francisco, Ca
Default

I'm pretty sure the JIC's were discontinued and don't the titan motorsport ones require you to run supra control arms?
Reply
Old Sep 23, 2010 | 07:14 PM
  #10  
ConSynX's Avatar
ConSynX
Lexus Test Driver
iTrader: (1)
 
Joined: Oct 2005
Posts: 1,052
Likes: 2
From: PA
Default

I gave up trying to get the camber correction kit new from D2Racing and Daizen...i was desparate. I waited something like a year.

I found a set and had them installed in some rear uppers that I am selling...HOWEVER, I had them put in backwards for MORE negative camber Instead of aiming for 5-6degrees, i'm going to get different wheels and dial back to ~2-3.
Reply
Old Sep 23, 2010 | 07:53 PM
  #11  
ClearP's Avatar
ClearP
Lead Lap
 
Joined: Sep 2010
Posts: 680
Likes: 0
From: CA
Default

how low do you have to go to make use of the camber kit?
Reply
Old Sep 23, 2010 | 09:54 PM
  #12  
xknowonex's Avatar
xknowonex
Lexus Fanatic
iTrader: (2)
 
Joined: Apr 2005
Posts: 5,045
Likes: 1
From: CA
Default

Originally Posted by ClearP
how low do you have to go to make use of the camber kit?
My car, as shown in the picture below is at -2.5, which is beyond factory specs, and it is not even that low. It is already maxed out

Reply
Old Sep 23, 2010 | 11:36 PM
  #13  
Toastt's Avatar
Toastt
Thread Starter
Pole Position
 
Joined: Aug 2009
Posts: 251
Likes: 0
From: Florida
Default

http://www.titanmotorsports.com/r2rabcacokit1.html

The title says its for 93-98 Supras but in the description it says it can be used for anyone AND it's cheaper

Originally Posted by ClearP
How low are you? I have a set that I'm using but I thought I didnt need it actually lol
Are you saying you want to get rid of it? Because I'm pretty low, like daily scraper out of my driveway low
Reply
Old Sep 24, 2010 | 03:26 AM
  #14  
kwg's Avatar
kwg
Lead Lap
iTrader: (1)
 
Joined: Dec 2008
Posts: 671
Likes: 0
From: San Francisco, Ca
Default

Originally Posted by Toastt
http://www.titanmotorsports.com/r2rabcacokit1.html

The title says its for 93-98 Supras but in the description it says it can be used for anyone AND it's cheaper
used for anyone? so it will go on my '04 Sienna?
Reply
Old Sep 24, 2010 | 03:27 AM
  #15  
kwg's Avatar
kwg
Lead Lap
iTrader: (1)
 
Joined: Dec 2008
Posts: 671
Likes: 0
From: San Francisco, Ca
Default

Originally Posted by xknowonex
My car, as shown in the picture below is at -2.5, which is beyond factory specs, and it is not even that low. It is already maxed out

your car is gorgeous...
Reply



All times are GMT -7. The time now is 12:54 PM.