ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   SC - 1st Gen (1992-2000) (https://www.clublexus.com/forums/sc-1st-gen-1992-2000-6/)
-   -   Door Handle doesn't work (an unexpected reason) (https://www.clublexus.com/forums/sc-1st-gen-1992-2000/522713-door-handle-doesnt-work-an-unexpected-reason.html)

tinman Sep 1, 2010 08:21 PM

Door Handle doesn't work (an unexpected reason)
 
A month ago my passenger side door handle stopped working. It worked just fine from the inside, but from the outside it would not open. I browsed the forums and found this:
https://www.clublexus.com/forums/sc-...iy-w-pics.html

This seemed pretty reasonable to me, and I had fixed a door on another car that did broke in a similar way last year. So I started to take the door apart, when much to my amazement , I pulled out the actuator arm with the plastic clip. This was the actuator arm that connects the door handle to the latch.It was just sitting in the bottom of the door frame. (it was not the smaller arm that connects the key lock to the door latch.)

https://www.clublexus.com/forums/mem...img-0418-1.jpg

You can see exactly where it broke here:
https://www.clublexus.com/forums/mem...img-0419-1.jpg

My problem is, you can't purchase just the actuator bar, you have to purchase the entire latch/lock unit. Which goes from the outer door handle, to the door latch, to the cables that connect the inner door handle. It's pretty large and the dealer wants more than $350 for it. Anyone here have this problem? Do you think i can go to the hardware store, purchase a washer, weld it to the actuator, then glue it onto the door latch?

meangreen1 Sep 1, 2010 08:23 PM

Just get a used one.

good2go Sep 1, 2010 08:52 PM

search around a bit more. there's definitely a thread on here from someone who repaired that rod (O.L.T. maybe??)

good2go Sep 1, 2010 09:15 PM

damn,
I'm just too nice today. lol

https://www.clublexus.com/forums/sc-...anism-arm.html

https://www.clublexus.com/forums/sc-...iy-w-pics.html

silhoulex Sep 1, 2010 09:23 PM

i just fixed mine today. the arm was broke. jammed it down in that hole where it pushes down to open the door, and ziptied it tite so it doesnt have much movement. hopefully it stays

tinman Sep 1, 2010 10:37 PM


Originally Posted by good2go (Post 5758631)

Oh, nice! Thanks. One big happy forum! Group hug! :hug:

OaklandLex Sep 2, 2010 11:33 AM

Can someone plz tell me if the toyota solara lock/latch mechanism will fit the SC?


All times are GMT -7. The time now is 07:02 PM.


© 2026 MH Sub I, LLC dba Internet Brands