YES I SEARCHED like crazy. I have a '94 SC300. At first my climate control was stuck at 75 degres, no matter how much I turned the **** around te temp wouldnt move. So I went ahead and baught a new **** mechanism, now I can change the temp from cold to 75, it STILL wont go past 75 degrees.

What do you guys think the problem is now? It must be the main climate control unit right? What else could it be? With the new **** I have all functions except to go pasty 75 degrees. And yes its absolutly freezing in NJ!thanks

 

I was going to suggest a new **** assembly... But since you did that, the chances of it being bad as well are pretty slim. Climate control would be next. Do you have anyones you can test?

 

Negative, I dont know anyone with an SC. Thats a great idea though. thanks

 

Anyone have any other experiences or input? Is anyone selling an climate control unit?Thanks

 

Used parts can be purchased through Aliga.

 

most likely the wiring. Mine did that. I checked the connections, and a wire was loose on the pigtail to the ****.

 

now mines doin that..fml i just got it "fixed" today too..it was my cig lighter fuse

 

wow. good to know what to try. mine has similar problem, will have to try tomorrow...thanks...

 

At least it got stuck at a comfortable temperature

 

so does the Cig fuse control anything with the CC unit?

 

yes it does..i blew the cigarette lighter fuse and my CC would come on just as a blank screen and not do anything

 

im gonna bump this since i've been looking and still haven't found a definitive answer. I'm moving to AZ so a working AC would be nice..

 

272 views and nothing so far..checked connections and nothing was wrong..could i have shorted a wire? anyone?

 

Maybe you have a bad CC unit? Try looking around for a USED unit for a reasonable price in the classifieds

 

Okay everyone. I have found the problem. I traced every wire in that harness, everything worked. I replaced my CC unit, that didn't fix it. I never suspected the **** because, it's a rheostat..its just a switch with multiple points..but lo and behold that is the fix. Replace your **** assembly!