SlowC400

Has anyone done a 20x11 +15???

wth98sc

Wow slowc lol

flash92sc

iTrader: (20)

Does anyone have these rims on their SC. With BBK I am looking to buy a set and I cant get info on the offset I need to clear the brakes. Any help would be greatly appreciated.

SOARER525

iTrader: (2)

Fresh Set...still at the shop doing a driver side wire harness relocate....any help or tips on how to do so would b much appreciated.
AllStar Black Chromium SP5ive
245/40/18x9 +25 offset rolled and shaved
275/35/18x10 +25 offset rolled & shaved

Sc400NL

looks perfect ,
i set my eyes on some rims who only are available in the same figures that you have , how is the rubbing? can you run on normal camber ?
i am about to roll my fenders flat

redlinemac

Another thread for the reroute.

Here is the

LINK

but you should explore.

SOARER525

iTrader: (2)

Thanks! I'm on normal camber just the way I wanted, I love it! Depends if your dropped or not. I'm on Megan coils and I had to bring it up 3/4 of an inch to be safe n I'm more than pleased except for the fact that I had to remove my front splash guards completely bc it was rubbing still so they aren't on anymore. It left my fog lights bare naked with no protection for moisture to get in and burn my HID bulbs and GUESS what happened...not even one day n they were out. CANT WIN! That's what u get when u mess with the splash guards. I have to figure it out otherwise it's gonna be a chronic issue.

SOARER525

iTrader: (2)

Lifted it a little on coils to prevent rubbing could of had it much lower but I'm experimenting on my Megan coils, what do u guys think

SOARER525

iTrader: (2)

Another view of the setup

ninjaCEO

I have some extremely aggressive wheels 18x10 -0 front and 18x11 -0 rear.

I'm running 255/35 in rear, and a 225/35 in the front

here are the pics, I have ARP extended studs for an IS300 and I plan to run a 3mm spacer to clear LS460 calipers.

here's the pics of the fitment (rx8 trolling in the back.)

Will this work?

ninjaCEO

On BC coils and I do have a daizen bushing set that needs to be installed.

PeteSoarer

Front will work, but rear might need some pull or max out camber. Very nice wheels.

jadu

iTrader: (42)

^^^ Real aggressive setup. For the fronts and rears, you're gonna need a slight pull; I'm estimating about 1/4" to 1/2" at the most, maybe less if you decide to run more camber.

ninjaCEO

All right awesome guys thanks for the help, I may run a 235/40 to help out in the rear. Now time find a fender roller I will repost the set-up upon completion. Thanks again much appreciated.

Supremeg56

iTrader: (1)

Before I look into buying these wheels a friend of mine is selling for dirt cheap the specs are rears are 19 x9.5 tires are 275/30/19 offset 32 front are 19x8.5 tires 235/35/19 offset 36. Does anyone know if this will involve rolling the fenders. or if the wheels will have that sunken look to them To be honest right now I have stock suspension but plan on buying coil overs soon.

Any help would be greatly appreciated