Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#5086
Driver School Candidate
Cheeeeee! I just got my new wheels on my SC. Super stoked lol
Here are the specs:
Wheels: F 18x9 | R 18x10 with +20 offset
Tires: F 245/40/18 | R 275/35/18 with +25 offset
Going to need to shave and roll the fenders now since it's rubbing with passengers in the back seat.
I also will have to pull out the rear fenders a bit and maybe some camber to fit it once it's dropped with coilovers.
I Love the look of the copper / red combo
Here are the specs:
Wheels: F 18x9 | R 18x10 with +20 offset
Tires: F 245/40/18 | R 275/35/18 with +25 offset
Going to need to shave and roll the fenders now since it's rubbing with passengers in the back seat.
I also will have to pull out the rear fenders a bit and maybe some camber to fit it once it's dropped with coilovers.
I Love the look of the copper / red combo
#5089
Driver School Candidate
anybody know how this will go?
MB Battles
18x9.5
Offset +23
225/40/18
Is that to much poke in the front compared to the back? Do you think I will need fender mods? I'm dropped about 2 in.
MB Battles
18x9.5
Offset +23
225/40/18
Is that to much poke in the front compared to the back? Do you think I will need fender mods? I'm dropped about 2 in.
#5091
Finally!!!!
Had the new wheels/tires installed today.
These are a TSW brand, Lumarai, the Kya model in 19s. The fronts are 19x8 +37 sporting Falken FK453 235x35 and the rears are 19x9.5 +44 with Falken FK453 275x30.
My thanks to all the posters on this thread for the great reads, advice, and information, especially jadu for all the pointers, and Raine for the inspiration.
These are a TSW brand, Lumarai, the Kya model in 19s. The fronts are 19x8 +37 sporting Falken FK453 235x35 and the rears are 19x9.5 +44 with Falken FK453 275x30.
My thanks to all the posters on this thread for the great reads, advice, and information, especially jadu for all the pointers, and Raine for the inspiration.
Last edited by Duck05; 04-08-15 at 09:02 PM.
#5092
Driver School Candidate
Join Date: Nov 2013
Location: FL
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
hmm, I got a great deal on some RennTech Monolite Wheels, They are 19" +29 front, +42 Rear. Tire sizes are 255/35/19 front and 295/30/19 rear. The rears rub... a lot. The fronts rub, but not very much. Just wanted some info on rolling or pulling the rear fenders. Just came from a body shop that told me it would cost $1500-$1700 for the work BEFORE paint, to roll and pull the fender, Since i dont think rolling alone will be enough he said the inner wheel housing would need to be cut and have metal added to it to pull the fenders. If someone with experience in this matter on SC's could help me out or point me in the right direction i would appreciate it, Searched through the forums for a bit but couldnt find anything regarding the actual metal work involved with pulling the rear fenders. I would really like to keep these wheels if possible.. Thanks
#5093
live.love.laugh.lexus
iTrader: (42)
They will look like this with 8mm less poke.
#5094
live.love.laugh.lexus
iTrader: (42)
hmm, I got a great deal on some RennTech Monolite Wheels, They are 19" +29 front, +42 Rear. Tire sizes are 255/35/19 front and 295/30/19 rear. The rears rub... a lot. The fronts rub, but not very much. Just wanted some info on rolling or pulling the rear fenders. Just came from a body shop that told me it would cost $1500-$1700 for the work BEFORE paint, to roll and pull the fender, Since i dont think rolling alone will be enough he said the inner wheel housing would need to be cut and have metal added to it to pull the fenders. If someone with experience in this matter on SC's could help me out or point me in the right direction i would appreciate it, Searched through the forums for a bit but couldnt find anything regarding the actual metal work involved with pulling the rear fenders. I would really like to keep these wheels if possible.. Thanks
#5096
Driver School Candidate
Join Date: Nov 2013
Location: FL
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
The rear rims are 10.5" so a 255 would have to be stretched to fit them, a fender roll isnt going to be enough. I was looking into getting the fenders pulled a bit, but the local places here dont know what im asking for and keep giving me quotes for $1500-2000 before paint...
#5097
Driver School Candidate
Join Date: Dec 2013
Location: Nevada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
In need....
Anyone in Vegas have a set of stock rims n tires for a 92 sc400? Bought the car on 20 inch chromes... one rim has been rigged and the tire will no longer seal.. jst want stock for now.. let me know.. thanks
#5098
Lexus Champion
iTrader: (13)
The rear rims are 10.5" so a 255 would have to be stretched to fit them, a fender roll isnt going to be enough. I was looking into getting the fenders pulled a bit, but the local places here dont know what im asking for and keep giving me quotes for $1500-2000 before paint...