12-12-14, 04:39 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
10-24-12, 07:26 AM
#4503
Lead Lap
iTrader: (2)
Join Date: Jun 2011
Location: Charleston, SC
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
Yea, they'll fit. I'm running 8.5" +25 and 10" +25. The rear will be really close to flush. I just have my rears slightly rolled with a 275 wide on them. Granted, I'm not super low. I'm on Supra TT struts, with Supra TT drop springs
10-27-12, 09:01 PM
#4505
10-29-12, 09:24 PM
#4510
Driver School Candidate
Join Date: Oct 2012
Location: Ut
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys first post on Club Lexus.
I have some rims for my SC and I'm looking to get tires but can't decide what size to get. I searched on here and didn't see anyone running the same width and offset.
They are 18x8 +38 offset all around.
I plan to lower it on coilovers and Id prefer not to modify the fender lips.
I'm thinking 235/40 and 245/40.
appreciate anyone's input, Thanks
I have some rims for my SC and I'm looking to get tires but can't decide what size to get. I searched on here and didn't see anyone running the same width and offset.
They are 18x8 +38 offset all around.
I plan to lower it on coilovers and Id prefer not to modify the fender lips.
I'm thinking 235/40 and 245/40.
appreciate anyone's input, Thanks
Last edited by trboSC; 10-29-12 at 09:46 PM.
11-02-12, 01:15 PM
#4513
Lexus Test Driver
I'm planning on getting 19x9 and 19x10 15+ offset all around (I think, for sure I remember it was one or the other). I've already rolled my fenders and my rears are like -6 camber on the driver side and -5 on the other (my camber has been pretty off ever since I lowered my car, any suggestions for aftermarket arms?). Do you guys think I can fit these tucked? I wanna ride on them for even though my camber is off (my toe should be good though, I plan on getting an alignment once I get the wheels. I just wanna come with the wheels on while I get the alignment).
P.S. the tires are 215/35/19 front 235/35/19 in the rear
P.S. the tires are 215/35/19 front 235/35/19 in the rear
11-08-12, 01:23 PM
#4514
I'm planning on getting 19x9 and 19x10 15+ offset all around (I think, for sure I remember it was one or the other). I've already rolled my fenders and my rears are like -6 camber on the driver side and -5 on the other (my camber has been pretty off ever since I lowered my car, any suggestions for aftermarket arms?). Do you guys think I can fit these tucked? I wanna ride on them for even though my camber is off (my toe should be good though, I plan on getting an alignment once I get the wheels. I just wanna come with the wheels on while I get the alignment).
P.S. the tires are 215/35/19 front 235/35/19 in the rear
P.S. the tires are 215/35/19 front 235/35/19 in the rear
It's good that you have your fenders already rolled, but you might (maybe) need a pull on all four fenders if you want the car to sit right... and by right I don't mean -6 camber. You don't need -6 camber at all with those wheel sizes.
11-08-12, 08:28 PM
#4515
Lexus Test Driver
You shouldn't need aftermarket camber adjustment for those wheel sizes. My setup is slightly more aggressive and I'm still on mostly stock suspension.
It's good that you have your fenders already rolled, but you might (maybe) need a pull on all four fenders if you want the car to sit right... and by right I don't mean -6 camber. You don't need -6 camber at all with those wheel sizes.
It's good that you have your fenders already rolled, but you might (maybe) need a pull on all four fenders if you want the car to sit right... and by right I don't mean -6 camber. You don't need -6 camber at all with those wheel sizes.
I totally forgot about this thread, sorry. But I'm thinking of getting:
19x10 13+ and 19x11 9+
Do you guys have any pictures of setups close to that?