raine

iTrader: (7)

It's not about the tire size, it's the Mazda wheel; it will be sunken in a lot.

jminor

That was my next question! What size spacers to run?

raine

iTrader: (7)

Depends on the offset.

jminor

I believe it is 50

jminor

I also notice alot of ppl using the g35 wheels, could someone post their setup with those on a stock ride height please!!

raine

iTrader: (7)

Dude, Google it. Put some effort into it, there's a bunch online I found in 3 seconds.

As for the RX8 wheels, +50 ofset you should run a spacer that's.... 50mm.

In other words, not worth it.

jminor

dude I did google it and did not find exact specs to go with pics, at least not on a stock ride height sc which is why I posted here looking for more specific info and hopefully pics I see alot of ppl here running the g35 wheels as well as the rx8 wheels but did not find what I was looking for hence the post.. Sorry for wasting everyones time I guess..

raine

iTrader: (7)

Jesus.

If you Google "SC300 G35 wheels" you'll get a bunch of pics of SC's on various G35 wheels. And if you're wondering why they are all lowered on springs or coilovers is simply because your car will NOT LOOK GOOD AT STOCK HEIGHT with 18's. Unless you dig the steamroller look.

OH HEY LOOK - I used the search function of this forum using "SC300 G35 wheels" and on the first page I found this:
https://www.clublexus.com/forums/sc-...35-wheels.html

OH HEY LOOK #2 - Now I tried "SC300 RX8 wheels" and on the first page I also found this:
https://www.clublexus.com/forums/sc-...eels-waaa.html

Ok? Unbunch the panties now, this thread is here to help you and guide you for wheel fitment - not to spoonfeed you.

CalitriSC

iTrader: (13)

Yea a 50mm spacer would be needed lol.

jminor

thanks for the spoon feed... sorry that I pissed you off I just asked a question that I did not find the answer to, guess I will look harder next time

raine

iTrader: (7)

Not even close LOL

Kris9884

iTrader: (7)

You're so dramatic bro, chill. All he's saying is use the search and don't be lazy, you'll almost always find your answer faster than a reply anyway.

soarer13oy

iTrader: (13)

Im getting ready to order a set of ccw classics and would like some opinions on what sizes i should get. I have rolled fenders and can cut them if needed. I also have coilovers so the height can be adjusted accordingly (dont need to be slammed). I would like to avoid pulling the fenders. I wanted to know if its possible to have a set of 18x9.5 f and 18x11s in the rear. I would prefer to not stretch the tires much as i do plan on having a good amount of power. I want to run 235/40 f and 275/35 r. Im very open to suggestions.

I really like this look, but will not be as low.
http://www.stancenation.com/2010/05/...-bad-lexus-sc/

CalitriSC

iTrader: (13)

I would suggest doing a +22 front and +35 rear with the set up you want. That will allow room for the wide tires ect.

soarer13oy

iTrader: (13)

Thanks buddy il give them a call