12-12-14, 04:39 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
05-30-12, 08:41 PM
#4248
Pole Position
Join Date: Feb 2012
Location: nor cal
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
not my car, but I have to post this, sorry if its a repost.
Its an old for sale
I dont think he ever ended up driving with these wheels, btw
"SSR A-dish wheels 18x10 +7(high disk) 18x11 -7(low disk)"
Its an old for sale
I dont think he ever ended up driving with these wheels, btw
"SSR A-dish wheels 18x10 +7(high disk) 18x11 -7(low disk)"
06-06-12, 04:02 PM
#4249
Driver School Candidate
Join Date: Jun 2012
Location: WA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
i have lowered my sc by about 3cm in the rears and 2 cm in the front . running 18x8.5, 235's all round no sure of offsets. pretty close to the rear fender at the back but heaps of space at the fronts
just bought 18x9 +20 front rims and 18x10 +20 rears
wondering what i will have to do to get nice fitment. will i have to roll my gaurds/get spacers? what tires should i be looking at wrapping my new rims in? pretty clueless
thanks to anyone that can help!
just bought 18x9 +20 front rims and 18x10 +20 rears
wondering what i will have to do to get nice fitment. will i have to roll my gaurds/get spacers? what tires should i be looking at wrapping my new rims in? pretty clueless
thanks to anyone that can help!
06-11-12, 03:23 PM
#4253
Lexus Test Driver
iTrader: (6)
Join Date: May 2010
Location: Colorado Springs, CO
Posts: 1,442
Likes: 0
Received 4 Likes
on
4 Posts
anyone know of anyone with,
18x8.5 +5
18x9.5 +10
right now both wheels are at +20 and i am debating what spacer size to run. the rears at 20+ are flush with my drop but still have gap with the 245/40's to i was thinking the +10 spacer would fill it. and the front has a significant gap with a 225/40... both of my fenders are rolled flat.
18x8.5 +5
18x9.5 +10
right now both wheels are at +20 and i am debating what spacer size to run. the rears at 20+ are flush with my drop but still have gap with the 245/40's to i was thinking the +10 spacer would fill it. and the front has a significant gap with a 225/40... both of my fenders are rolled flat.
06-13-12, 01:01 PM
#4254
06-14-12, 09:46 PM
#4257
Lexus Test Driver
iTrader: (6)
Join Date: Aug 2008
Location: Maryland
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
need some advice from the pro's
Currently im SUNK on TT wheels with 15mm spacer in the rear, and a 10mm spacer up front. the car has rolled and pulled fenders to fit a varrestoen 2.2.1 18x10.5 +0 on all four - as far as i know.. could be the +12's wasnt my car at the time (see below links).
http://i143.photobucket.com/albums/r...7/babb40ea.jpg
http://i143.photobucket.com/albums/r...7/9da84138.jpg
anyway, this is how it sits right now:
https://fbcdn-sphotos-a.akamaihd.net...30394542_n.jpg
http://i143.photobucket.com/albums/r...7/754c244b.jpg
http://i143.photobucket.com/albums/r...767/front3.jpg
so, i want xxr 521's and i want to run the 18x10 +25 with a +15mm spacer up front to clear my bbk and maybe a +10 on the rear (not sure on that yet). im not sure on what tire size to run, i was thinking about:
Front: 235/40-18 Achilles ATR Sport
Rear: 275/35R18 Dunlop Direzza DZ101
im not really into the stretched look, i like meaty tires.
Currently im SUNK on TT wheels with 15mm spacer in the rear, and a 10mm spacer up front. the car has rolled and pulled fenders to fit a varrestoen 2.2.1 18x10.5 +0 on all four - as far as i know.. could be the +12's wasnt my car at the time (see below links).
http://i143.photobucket.com/albums/r...7/babb40ea.jpg
http://i143.photobucket.com/albums/r...7/9da84138.jpg
anyway, this is how it sits right now:
https://fbcdn-sphotos-a.akamaihd.net...30394542_n.jpg
http://i143.photobucket.com/albums/r...7/754c244b.jpg
http://i143.photobucket.com/albums/r...767/front3.jpg
so, i want xxr 521's and i want to run the 18x10 +25 with a +15mm spacer up front to clear my bbk and maybe a +10 on the rear (not sure on that yet). im not sure on what tire size to run, i was thinking about:
Front: 235/40-18 Achilles ATR Sport
Rear: 275/35R18 Dunlop Direzza DZ101
im not really into the stretched look, i like meaty tires.
Last edited by bryan767; 06-14-12 at 09:50 PM.
06-16-12, 09:04 AM
#4258
Driver School Candidate
Join Date: May 2009
Location: KK
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Need some advise guys.
Front: 19" x 9.5J Offset 0
Rear: 19" x 11.0J Offset +11
How many camber should I go with a smooth fender rolls at front & rear? Yet, what's the ideal tire size for front & rear?
Thanks in advance.
Front: 19" x 9.5J Offset 0
Rear: 19" x 11.0J Offset +11
How many camber should I go with a smooth fender rolls at front & rear? Yet, what's the ideal tire size for front & rear?
Thanks in advance.
06-16-12, 01:48 PM
#4259
Driver School Candidate
Join Date: Oct 2011
Location: OR
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Great thread. Just spent the last hour looking at it and now I know what will fit my SC. Kudos to Raine for seemingly devoting his life to the thread. I don't know when he has the time to work on his own car.
VC
VC
06-17-12, 12:06 AM
#4260
Not slammed, not flush, but you know what? Who cares - the car looks very clean. I like it, almost looks factory. Nice job. 
BTW just curious, is that film overlay or transparent paint on the fogs? I'm debating on if I should do that or not to mine.
You'll need a pull all around for sure brother. 
Gimme a set, I'll take pics
With 19's pothole dodging is part of the game 
Thank you for actually doing the work and reading through the thread. Most people who just post without reading through would have gotten their answer to their question - especially the common sizes that always pop up in this thread every other week - but I guess for some people that's too much to ask 
BTW just curious, is that film overlay or transparent paint on the fogs? I'm debating on if I should do that or not to mine.
So right now on my sc I have work varanzas 19x10 +38 n 19x11 +35 with 225/35/19 n 245/35/19 falkens stretched. Fenders rolled. Jic coilovers.
Now I want to pick up this set of ssr sp3 same sizes 19x10 n 19x11 -1 off set all around on kumhos..do I need more fender work or will I be fine?
Now I want to pick up this set of ssr sp3 same sizes 19x10 n 19x11 -1 off set all around on kumhos..do I need more fender work or will I be fine?
Gimme a set, I'll take pics
Just afraid of getting my wheels bent from pot holes and such. I have 19x10 275/35/19s in the rear so i really cant fit that in the front plus it would look just plain ugly if i switched them. Il probably throw on some spacers and lower it some more if needed. New tires arent so cheap.
