12-12-14, 04:39 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
10-03-11, 02:03 PM
#3631
I might be off on the math (doing it in my head real quick as I type this) but my 19x10.5 is a +23. So your 19x11 +28 would be like what... about +5mm out more on offset, not to mention the extra 1/4" of wheel width (remember, 1/2" wider = 1/4" per side) and 1/4" is like 5-6mm. Add that up and you're talking +10-11mm out more compared to what I'm running, and my car needed a roll and a pull to clear... so that 19x11 +28 would definitely need the same, and I'm running around 2.1-degrees of camber out back. 
10-03-11, 04:12 PM
#3633
Pole Position
iTrader: (10)
Join Date: Sep 2010
Location: Ca
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
I might be off on the math (doing it in my head real quick as I type this) but my 19x10.5 is a +23. So your 19x11 +28 would be like what... about +5mm out more on offset, not to mention the extra 1/4" of wheel width (remember, 1/2" wider = 1/4" per side) and 1/4" is like 5-6mm. Add that up and you're talking +10-11mm out more compared to what I'm running, and my car needed a roll and a pull to clear... so that 19x11 +28 would definitely need the same, and I'm running around 2.1-degrees of camber out back.
The 11j +28 will only stick out a hair over 1mm more than the 10.5j +23
10-03-11, 04:23 PM
#3635
Edit: searched and saw some examples.. should be able to fit. Thanks guys
Last edited by VINCE9164; 10-03-11 at 04:30 PM.
10-03-11, 08:50 PM
#3636
Driver School Candidate
Join Date: Sep 2011
Location: Al
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
looking at gettning tsw sneddertons or konig lace 18-8 front 18-9.5 rear can't find a for sure answer on the offset and tires are 245-40-18 front and 265-40-18 rear. any help is appreciated
10-04-11, 06:17 AM
#3638
Here is mine on 19's. It's not lowered yet
10-04-11, 11:52 AM
#3639
Driver
Join Date: Feb 2011
Location: ga
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Im running a poke Fitment im running 10.5/18 and 0+ offset all around with 245/40/18 in the front and 255/35/18 in the rear with a Good pull and a roll its also lowered 2 inches on Coils..Going to the body shop next week for finder touch up
Last edited by sc101; 10-04-11 at 11:56 AM.
