12-12-14, 04:39 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
06-29-11, 05:30 PM
#3481
will fit fine with a 265 30 and a roll
edit.. will need pull as well should be too bad tho.. all depends on kinda stretch you plan you run and how low
Im hoping jammed.. pretty much exactly same sizing Im looking at running on my next set.. tho 19x10+12 front 19x12+24 rear is what Im thinkin..
Current already posted but 18x10+18 235 40 18 18x11+24 265 35 18
Im running Tein Coils.. Air is for Balloons
edit.. will need pull as well should be too bad tho.. all depends on kinda stretch you plan you run and how low
Im hoping jammed.. pretty much exactly same sizing Im looking at running on my next set.. tho 19x10+12 front 19x12+24 rear is what Im thinkin..
Current already posted but 18x10+18 235 40 18 18x11+24 265 35 18
Im running Tein Coils.. Air is for Balloons
Last edited by slydjunkie; 06-29-11 at 05:55 PM.
The following users liked this post:
Typ2nuk (11-10-20)
07-02-11, 01:23 PM
#3485
18x11-14 would require a lot of pull and roll and a 245 stretched onto the 11 .. lol.. I wouldnt recommend it now a 18x11+14 would work
as for 300rwhp 265 should be fine.. its what Im running.. It steps out when i want it too
as for 300rwhp 265 should be fine.. its what Im running.. It steps out when i want it too
07-10-11, 11:21 AM
#3488
Driver School Candidate
iTrader: (3)
Join Date: Nov 2010
Location: minnesota
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Anybody think these sizes will fit with a massive pull in the rear and not sure about the fronts?
18x11 +10 O disk 18x12.5 -23 O disk
Any help would be great thanks
18x11 +10 O disk 18x12.5 -23 O disk
Any help would be great thanks
07-10-11, 12:34 PM
#3489
Pole Position
iTrader: (10)
Join Date: Sep 2010
Location: Ca
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Fronts will fit, no way the rears will fit without over fenders or a lot of bodywork.
I had 18x11.5+19 fronts and 18x12-17 rear before so I'm not just talking out of my ***
07-20-11, 01:51 PM
#3493
Driver School Candidate
yo your car looks hard as hell. im also runing a low offset i got 20x9in front 20x10.5 rear and i love it
[IMG]<a href="http://s66.photobucket.com/albums/h247/olaudah/?action=view&current=IMG_0004-1-1.jpg" target="_blank"><img src="http://i66.photobucket.com/albums/h247/olaudah/IMG_0004-1-1.jpg" border="0" alt="Photobucket"></a>[/IMG]
[IMG]<a href="http://s66.photobucket.com/albums/h247/olaudah/?action=view&current=IMG_0004-1-1.jpg" target="_blank"><img src="http://i66.photobucket.com/albums/h247/olaudah/IMG_0004-1-1.jpg" border="0" alt="Photobucket"></a>[/IMG]
07-20-11, 02:42 PM
#3494
yo your car looks hard as hell. im also runing a low offset i got 20x9in front 20x10.5 rear and i love it
[IMG]<a href="http://s66.photobucket.com/albums/h247/olaudah/?action=view&current=IMG_0004-1-1.jpg" target="_blank"><img src="http://i66.photobucket.com/albums/h247/olaudah/IMG_0004-1-1.jpg" border="0" alt="Photobucket"></a>[/IMG]
[IMG]<a href="http://s66.photobucket.com/albums/h247/olaudah/?action=view&current=IMG_0004-1-1.jpg" target="_blank"><img src="http://i66.photobucket.com/albums/h247/olaudah/IMG_0004-1-1.jpg" border="0" alt="Photobucket"></a>[/IMG]
07-21-11, 07:51 PM
#3495
im borderline into the amistad dish wheels 18x10 -5 18x11 -17 235/40/18 front and 245/40/18 rear with an extra set of 235s for the rear (so i have some variety) MID DISK front and rear
just getting a second opinion the owner was straight up and said id need a roll and pull. just want to make sure and i reallllllllyyyy dont want to hack my body up to bad as she is still pretty clean. is this something a heat gun and a eastwood fender roller can take of?
just getting a second opinion the owner was straight up and said id need a roll and pull. just want to make sure and i reallllllllyyyy dont want to hack my body up to bad as she is still pretty clean. is this something a heat gun and a eastwood fender roller can take of?
