Luv2xl

iTrader: (5)

Agreed with Cherplex...
Oz, that wheel in the front will be tight bro.. I am running a 19x8.5 +15 and had to roll (and - camber) to get clearance. you will need to roll and pull with - camber and a stretched tire..

Present side shot:

http://www5.snapfish.com/snapfish/sl...NAME=snapfish/

Past side shot:

http://www5.snapfish.com/snapfish/sl...NAME=snapfish/

Rear shot:

http://www5.snapfish.com/snapfish/sl...NAME=snapfish/

Front shot:

http://www5.snapfish.com/snapfish/sl...NAME=snapfish/

taki2004

just joined and excited to be a part of CL. I have a 99 SC400 with 27k original. does anyone know where i can find these wheels pictured here? they are posted by a member named "seize" but can't find him. thanks everyone!

DoomLight

iTrader: (3)

those almost look like chromed TSW Snettertons.

taki2004

thx man....I'll look them up......really appreciate it....
pc

MIGS

iTrader: (15)

been lookin around on various sites, but i cant find a definite answer. I have an idea, but still lookin for some verification here from someone who's ran this size on stock body SC...

will a 19x11" (+18 offset) poke, or be flush with our rear stock fenders?

plex

iTrader: (11)

^^^ That will poke a lot on stock body.

MIGS

iTrader: (15)

whats a lot? about 1" or 2" poke?

my rears are currently rolled flat and pulled/flared out an 1".....so i'm taking an educated guess that i might be able to execute the 11's out back with some tire stretch and 3*(or so) neg camber.

SChema

iTrader: (2)

Currently my rears are about flush with the fenders. Wheels are 18 x 11.5 et 51.
With the rears you listed, you have about a inch poke compared to these.

Top View:



Rear View:

Bender25

iTrader: (10)

my 18x12-1 poke by about .5-1" with a 1" flare and max camber on stock adjustments.

Your 19x11+18 will stick out about 1.25"(32mm) less than my rims based on the widths/offsets alone so it should be easily doable

MIGS

iTrader: (15)

^thanks for the reference pic SChema.


when you say 1 inch flare...do you mean a "pulled" flare? i'm just tryign to visualize what you're saying so i can draw a better conclusion.

this is the flare im workin with..


*edit, i just looked at your pics and saw the pull u have..

thanks, your feedback helped me a lot ,especially since i saw that your barrels were wider and offset lower. makes me a lot more confidant that i can pull these 11's off.

imDementeD

iTrader: (7)

sry to thread jack a bit but would 20x11 + 15 poke more or less then +18? im so bad at offsets

SChema

iTrader: (2)

^, It will poke more than the +18. The lower the offset the more the wheel will sit away from the mounting surface.

imDementeD

iTrader: (7)

damn i was really liking the xxr 526 20x11 with that 5.5" lip but not willing to do any crazy work..a roll/pull is fine but that doesnt seem like itd be enough.

RockRash

how would the stock 16 sc400 wheels look with a spacer to make them sit flusher or slightly stick out past the fenders with 255/55

CalitriSC

iTrader: (13)

Ok 18x9.5/18x10.5

+12/+15 or +22/+22?