ScJz

I'm in the same debate ...and also have a guy near me selling his for...well used he wants new price but we all know tha'ts not going to happen

Toyoboy

Will these fit with a good pull and shave on a SC300?

Wheels:
19x9.5 +11 & 19x11 +18 5x114.3

kinch09

iTrader: (10)

jlexus95 i use photobucket

jlexus95

[IMG][/IMG]


18x8 f and 18x9.5 r stock suspension

jlexus95

[IMG][/IMG]

jlexus95

[IMG][/IMG]

fresh out the paint shop

SH_JZZ30

iTrader: (1)

What tire sizes do you plan to run?

With stretched tires the front can fit with just a roll. And the rears should fit with stretched tires, a roll, a pull, and some negative camber depending on how much you want to pull.

Beardog

iTrader: (1)

Can I put 275/35's on a 9.5 rear wheel (or any other 18 inch wheel) and have them fit under my stock rear fenders?

The reason I ask, is that I am looking at the PS2 Michelins in the classified tires section.

Thanks!

SChema

iTrader: (2)

^, you need to provide the offset. High 30's to mid 40's should fit under factory fenders just fine. 275 on the 9.5 is no problem. I ran them with a 27 offset with a mildly cut fender. You need to consider your drop as well.

Beardog

iTrader: (1)

I was going to find some wheels with +35 offset. So you think I should go a little higher than +35 offset, right?

(thanks again!)

SChema

iTrader: (2)

^, Honestly, I think you should be okay with +35 offsets in the rear. It's been so long since I've seen a stock fender with 9.5, +35, 275's.

Akil22

I am new to this site and was wondering if anyone has put 15 inch rims on their sc400. I have a 95 and can get a set of Michelin X ice but they are 205/65/15 not the standard 225/55/16's. They don't sell them but I was told that 15" rims from a honda or Camry might work but I am worried about clearance for the front calipers.. any suggestions. Thanks.

Beardog

iTrader: (1)

Hey guys, how will these 18 inch wheels work out with 245/40's (F) and 275/35's (R), on my stock 1995 SC300?? They are 18x8.5 and 18x9.5, +43 all four wheels.

I know that I can go as far as +35 offset, so I could always get some spacers later, if I desire, correct?

http://www.vrwheels.com/ame-fins-gold-p-3353.html

Triple C

iTrader: (2)

You want wider offsets like +25 all the way around. Then it should look flush

gdoutlex

iTrader: (4)

what you guys think of 18x10 +25 offset all around with 245/40/18 front and 275/40/18 rear? lowered on TT tein s tech?