thatWESguy

iTrader: (5)

fronts just need a roll, rears will need a slight pull, about -3 degrees camber all around and you should be straight

Forte EXE

iTrader: (1)

WOW! that is perfect! What are the wheel and tire specs?

thatWESguy

iTrader: (5)

Thanks

Specs:
AME Shallen CX
19x9.5 +10 19x10 + 7 (10 +3mm spacer)

about -3 degrees camber all around, front fenders rolled flat, rears slightly pulled

*disclaimer* I'm only running the spacer because the fenders were pulled slightly too much so I had to fill the empty space

BAD954BOI

iTrader: (5)

damn... thats Ooodeee sick is it +12mm spacers your using?
what is the factory offset on those wheels?

joewitafro

new trend of rolling your fenders a **** load and having so much tire stretch it aint funny? Dang. Its been a long two years since ive been here lol

Murvilboy

iTrader: (1)

stock 2001 Mustang GT wheels
17x8
unknown offset
with 245/45-17 tires

sc4hunnid

This is what I have on my SC400

18x9.0
Offset: +30mm

19x10.0
Offset: +30mm.

I need my fenders rolled in the rear. The front is fine.

turbodremz

iTrader: (18)

Pics? Im looking to get rims the same size soon, but 20mm all around, but would like to see the stance on your SC.

suprus

Heres my setup.. Its not too extreme like some peoples on here but its a good DD setup and I dont get unusual tire wear or anything.. Measurements are 19x8.5 +45 fronts with 10mm spacer and 19x10 +22 rear. Tires are 245/35 fronts and 275/30 rears. i could prob go 285/35 but I didnt know the exact fitment when I got em. Fenders rolled all the way around and no scrape what so ever. Almost perfectly flush with a little poke, and a mild stretch (for sale locally).

Heres My other setup. These are 19x8.5+40 front and 19x9.5 rear +20. Tires are also 245/35 and 275/30. Perfectly flush with no rubbing and could afford to go a little taller and wider on the rear tires, (but Im not a huge fan of stretch) Also, on coilovers with a little more negative camber then stock.

VegasSC3

i am looking at 20x8.5 +32 and 20x10.5 +30 will it fit and what tires should i go with. i am also planning on getting coilovers.

AngelBaby

I [LESS THAN 3] THIS THREAD! Thank yooooouu!

Vincent123

iTrader: (24)

Lol "less than 3" got me confused for a bit. Then I realized it was <3 which is a heart.. brainfart moment

AngelBaby

haha it's all good! I didn't get it at first either ^.-

snakehead

iTrader: (1)

95 SC300 Enkie Rpf1 18x9+35 Front 18x10+38 Rear or Work Emotion CR kia 18x9.5+12 F 18x9.5+12 rear. What would you do ??

SH_JZZ30

iTrader: (1)

Work emotions unless you can get a lower offset for the rpf1. It also depends on the size of tire you're going to get and if you're looking for looks or performance.