virusoid

Here's what an IS350 "upgraded" factory rim and wheel package looks like.

F: 18x8, 45mm offset, 225/40/18
R: 18x8.5, 50mm offset, 255/40/18

Espelir ASD springs, 2" drop, stock struts.

702SC400

Looking good.

HellFish

iTrader: (5)

i dont really care about ride comfort really. i drive it daily and havent had any complaints. just gotta avoid potholes.
just used what tires i had layin around. i like the way it looks and ive seen a 205 on a 10 so im not really pushin it too much. the front on the other hand...

Supreme86

Hey guys, Im in the market for getting some new wheels for my 95. I wanted to double check fitment with you guys here before I went out and spent money. The wheels I am interested in are 18x9.5, here are my questions

1. Will that fit all around?

2. If i get a 35 offset will I need a fender tuck? If so what is the lowest offset I can go WITHOUT needing a fender tuck?

Confusion

Hey I will be getting a 93 SC300 on friday
and dont know much about cars
I have a set of rx8 rims

I believe they are 18x8 and 50 offset
what is the best tires to mount these on the SC?
also what is the difference with a staggered setup compared to the same size all around?
all your help will be appreciated

Reach_01

iTrader: (3)

Will 18x9.5 +23 all around rub anywhere with a 245/40 on each? I know I'll need to roll everywhere. I'm on megans with all the wheel gap gone on stockers as of right now.

empower

Front will rub nasty. Run a 235 tops and roll flat.

Rear will fit no problem, could maybe even run a spacer.

Supreme86

can anyone help me out?

MGa

iTrader: (1)

Still looking for some nice wheels on my black onyx -97 SC400.
Can anyone help me out ?
Give me some choices maybe.

Love the Work VS-XX, but need some more info on fitments before I can buy them.
What does A disk, O disk or R disk mean?

I want 19"x8,5" with 235/35-19 tires in the front.
In the back 19"x ??
Is 19"x9,5" too wide for 245/35-19" ? Should I get 265 ?
Would love to see some lip, but not planning to roll fenders, can get some spacers later if I roll them.

So what offset should the VS-XX wheel be and what disk ?
Wheels and tires should not rub and can't stick out from the body(can't register in Finland).

Also planning on a set of coilovers, any tips on what to get so I can adjust the offset for the new wheels ?

Someone give me some good data and I promise I'll post some nice pics after I got my new wheel to replace the original 16" crome ones :P

VS-XX available models http://www.workwheelsusa.com/media/w...5/VSXX_PDF.pdf

djb5118

Here is another pic of a car on IS350 wheels.

Suspension:
Swift springs on Koni Yellow shocks for the Supra

fasttimes

Thanks man for great info. Looks like a manual with the car

menty

Hmm
19x9.5+18 front
19x11+11 REAR???

I know the front will fit, but what about the rear?

raine

iTrader: (7)

roll and a pull for sure

soulific

iTrader: (3)

Hey guys,

I just got my sc and am looking for a set of rims. Im looking at getting bbs lm reps in gold with polished step lip.

I need advice... Do you guys think I should go staggered or go same all around. These are my choices below. Can you let me know if they will work find an look good or will it be too aggressive. I will be rolling fenders but would like to avoid pulling.

1 = 19x10 20et rear, 19x8.5 15et front. ( staggered ) tires will have mild stretch
2 = 19x10 20et front and rear. (same all around) 235/35/19 tires all around

Which combinations you guys like better. Also can you let me know if both choices will be fine and not cause too many issues? Will the front 19.85 15 offset in the staggered setup look decent? Or will it stick out too much or not enough? What size lip would that offset on a 8.5 be?


Thanks in advance!...

Dai Kaiju

I'm pretty sure this has probably been covered somewhere in this thread before but this things i just absolutely huge and I didn't want to read all 150+ pages in hopes of finding it so I thought I'd just ask

I really want to get bigger wheels for my SC and I like the black TRD wheels from the Scion TC but they're all 18x7.5 I was wondering if those would work for the SC or if they would look too thin?