Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#2267
Pole Position
iTrader: (4)
just save up. The wheels make the car. You slap on cheap knock-off wheels on your car, your car is going to look like a cheap POS
Weds Kranze Cerberus 18x9.5/10.5 +0 offset on Federals
225/40 on the 9.5 and 235/40 on the 10.5
before:
after roll/pull, camber, and drop
Weds Kranze Cerberus 18x9.5/10.5 +0 offset on Federals
225/40 on the 9.5 and 235/40 on the 10.5
before:
after roll/pull, camber, and drop
#2268
Lexus Test Driver
nothing crazy here.
Advan RCII
18x9.5 +35 (all around)
245/40 F
255/35 R
Eibach Pro (mkiv supra)
KYB agx (mkiv supra)
Rolled a bit in front. Rear was left alone.
I'd like a small spacer in the back, 3-5mm i think. otherwise im ok with this.
Advan RCII
18x9.5 +35 (all around)
245/40 F
255/35 R
Eibach Pro (mkiv supra)
KYB agx (mkiv supra)
Rolled a bit in front. Rear was left alone.
I'd like a small spacer in the back, 3-5mm i think. otherwise im ok with this.
Last edited by RaynArt; 05-10-09 at 01:00 AM.
#2269
19x10+35
19x11+32
How hard would it be to make these work and what tire size should be used?
thanks in advance. Wheels are WORK EUROLINE LS. I have coilovers and a slight roll now.
19x11+32
How hard would it be to make these work and what tire size should be used?
thanks in advance. Wheels are WORK EUROLINE LS. I have coilovers and a slight roll now.
#2270
Lexus Champion
iTrader: (8)
Join Date: Dec 2003
Location: California
Posts: 2,605
Likes: 0
Received 0 Likes
on
0 Posts
These wheels will fit. Turn that slight roll into a real roll and shave your fenders to the bone. You're going to need to run some camber with these wheels as well. For tire sizes i'm thinking 245/35/19 for the front and for the rears 265/30/19
#2272
Lexus Champion
iTrader: (8)
Join Date: Dec 2003
Location: California
Posts: 2,605
Likes: 0
Received 0 Likes
on
0 Posts
Those will fit fine. The rears will be sunken in a bit. It's definitely a more conservative look, compared to some of the offsets that people are running now a days. But those will look good and will fit with ease.
#2274
Lexus Champion
iTrader: (8)
Join Date: Dec 2003
Location: California
Posts: 2,605
Likes: 0
Received 0 Likes
on
0 Posts
A 15mm would make it look a lot nicer. However you would probably want to shave the fenders due to the 275 tire in the back just to make sure there isn't any rubbing. If you shave/roll your fenders, you could run a 25mm spacer all around to make it GANGSTa
#2277
Driver School Candidate
iTrader: (2)
Join Date: Oct 2008
Location: CA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Wheel fitment help.
Ok I plan to run:
Work Emitz
18x8 +8 Front
18x10.5 -7 Rear
wheel pics
http://www.flickr.com/photos/3095275...7610188999419/
What are my options? New to Sc300 fitment and gone through tons of threads...
How do I "cut and pull"
or
should I consider over fenders and what size is optimum? tire size?
Please PM or reply to post. Thanks to all!
Work Emitz
18x8 +8 Front
18x10.5 -7 Rear
wheel pics
http://www.flickr.com/photos/3095275...7610188999419/
What are my options? New to Sc300 fitment and gone through tons of threads...
How do I "cut and pull"
or
should I consider over fenders and what size is optimum? tire size?
Please PM or reply to post. Thanks to all!