toyofreak

I'm really curious how this would fit.
20x8.5 +33 wrapped in 245/30
20x10 +33 wrapped in 275/30

Lowered with Megan Coils. Any advice is much appreciated.

vinh

iTrader: (8)

those will fit fine with a roll.

ProjectLex

Tire guys - I need some advice

I researched the wheel fitment pretty extensively, but still need some help on which tires would fit best for..............

20x8.5 Front, 20x9.5 Rear
Offset 20mm Front , 25mm Rear
Lip Size 2.5" Front, 3" Rear
Hub bore size 73.1 mm

Rolling fenders is not a problem and I assume I will need to. Coilovers going on eventually.

I needs some numbers suggested for the section width and sidewall aspect ratio. T.I.A.

mr-steveo

hi guy well ive just moved into the world of soarers as ive just sold my drift car, im from the uk, i have a 92 tt auto which is pretty mint condition, and i got it a bargin price of £800 which is about $1200 dollers i think.

her a pic of the drift car first, 2jzgte s14a built if from a bare shell made everything myself






now on to the soarer







the car came with tein hr coilovers and the kit thats on it now

sc300 are cheap in the uk you can pic a v8 for less than $1500

ive got some ssr professor to put on

the fronts are 18x9.5 et10 and the rears are now 18x11.5 et15 after i had some new outer lips made after i killed one when a tire popped of the rim drifting

mr-steveo

follow on

i popped the rims on just to check got get the centers painted hence the paint stripped rear wheel and the rear rim is before the new lip so is 10.5 j








let me know what you think

Gvr4

Will update soon with sc400 lip and lowering springs.

I want to go down and inch. So I'm looking for a set of Supra springs and struts.

wald.sc400

iTrader: (-1)

anyone has ran 17x7.5 all around with spacers?
i have some extra rims 17x7.5 +34 offset but 7.5 is just too skinny of a wheel for the sc, i dont like the sunken look but wondering if anyone has pulled this of with spacers? any pics?

Kaydee

mr-steveo, that's a really nice kit

ProjectLex

Any suggestions? Weird that the front offset would be lower than the rear. Should I just buy 5mm-10mm spacers right off that bat, or would the extra width and lip of the rear make up for it?

I've really got my eyes on these and any advice would be great. I wasn't thinking about 20's, but I like these wheels and others (Scott RU Not) pulled off 20's fine with a +36 offset.

And what tires?

Kaydee

^ front is lower offset but the back is a wider wheel...i think your rears will pop out more

OneJay

iTrader: (14)

350z Touring wheels. 18x8 +30 f / 18x8.5 +33 r ....15mm spacer in rear

ProjectLex

Thanks a lot for the response. I searched and searched, but I hadn't seen wheels with higher offsets in the front than in the rear.

I could still use some advice on tires, but I appreciate the response Kaydee.

I think I'm going for it!

Kaydee

my fronts are 29 while the back is 38

ProjectLex

I am looking at pictures of your ride from your garage link. You're right, both front and back look flush to me, even with those offsets.

Good job on fitment - they look great. You've been a real help. I am negotiating for those wheels as we speak!

I am probably over thinking this, I can always get some 5mm spacers if I don't like the way the rears sit.

Thanks again Kaydee!

WoRKeDiT

19x9.5f +25
19x10.5r +35

Will these work or will it take alot of modification? The wheels are Auto Coutures
tire size suggestions also, thanks.