Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#1876
How much work am I looking at to fit the AME's for sale in the wheel forum. Willing to work for it but wondering how hard they will be to live with...
20x9.5 +10
20x10 -3
Feel free to give it to me straight, just havent seen anyone on here pushing anything close as far as offset. Thanks in advance!
20x9.5 +10
20x10 -3
Feel free to give it to me straight, just havent seen anyone on here pushing anything close as far as offset. Thanks in advance!
for the rear, again camber will decide how much pull you need. its definately doable on a stock body.
#1877
Lead Lap
iTrader: (1)
Join Date: May 2006
Location: MD
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Okay so instead of trying to search through the previous 125 pages...here is my setup, what tires do you think would be best for them? I was thinking 225 or 35/35/19 and 255/30/19 but not sure....suggestions as I would like to try to minimize my fender rolling and such as much as possible but also don't want it to look dumb like people throwing a 225 on a 10" wide wheel!
Forgot to mention it is sitting on Buddy Club Race Spec Coilovers...
19x8.5 +35
19x9.5 +40
Thanks in advance!
Forgot to mention it is sitting on Buddy Club Race Spec Coilovers...
19x8.5 +35
19x9.5 +40
Thanks in advance!
#1878
will 18x10 +20 fit on the rear? I don't want to roll/pull but I'm willing to stretch the crap out of the tire, 225 or 235. and the car is at stock height but I may lower in the future.
I've read/skimmed through all 126 pages but didn't find the exact setup though it seems in all likeliness this won't work. thanks.
I've read/skimmed through all 126 pages but didn't find the exact setup though it seems in all likeliness this won't work. thanks.
#1879
Driver School Candidate
Join Date: Jun 2008
Location: Sacramento, CA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking at some wheels that are 18x8.5 +38 in the front and 18x9.5 +35 in the rear. I'd like to know if these would clear the fenders without any modifications and dropped to the point where it wouldn't rub but still look good.
I saw a few with almost a similar setup but the offsets are off by a bit.
I saw a few with almost a similar setup but the offsets are off by a bit.
#1880
Lexus Test Driver
iTrader: (1)
Join Date: Aug 2007
Location: VA
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking at some wheels that are 18x8.5 +38 in the front and 18x9.5 +35 in the rear. I'd like to know if these would clear the fenders without any modifications and dropped to the point where it wouldn't rub but still look good.
I saw a few with almost a similar setup but the offsets are off by a bit.
I saw a few with almost a similar setup but the offsets are off by a bit.
very conservative fitments, almost same as my front, it will be sunken in a bit more than you'd want but no fender mods needed. rears will also be sunk in for +35 et, but no fender mods. imho, i think the sc's rears need filling up as they are huge and the lines of the body run to it. if you go the staggered set up and run wide tires in the rear (min.255 - up) it will look sportier the wider the tires you put. to be flush in the rear, you need at least +24 et rear wheels and some rolling.
Last edited by mr2tosc4; 06-27-08 at 05:39 AM. Reason: +35 +38
#1881
Pole Position
iTrader: (1)
This thread has gotten out of hand with "will this fit questions" Someone needs to go through and delete those post so its easier to weed through fitments by the people who post there set-ups. If there are further questions on the set-up just take it to pms. Just my 2 cents
#1882
Lexus Test Driver
Join Date: Jun 2005
Location: Baton Rouge, Louisiana
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Well, I have a good one for you guys. Id like to know if these should fit.
The wheels are CCW Classic's.
Front- 18x10.5 w/ 315-35
Rear- 17x11.5 w/ 285-30
They dont reveal theyre offsets, but theyre for a MK4 Supra.
The wheels are CCW Classic's.
Front- 18x10.5 w/ 315-35
Rear- 17x11.5 w/ 285-30
They dont reveal theyre offsets, but theyre for a MK4 Supra.
#1883
Lead Lap
Join Date: Nov 2006
Location: honolulu, hawaii
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
i agree with vgnome on the clutter as most of these pages are full of will it fit q's
as for the ccw question if it fit on the supra it'll fit on your sc and if it needed any mods to work on the supra you will probably need to do so aswell
as for the ccw question if it fit on the supra it'll fit on your sc and if it needed any mods to work on the supra you will probably need to do so aswell
#1885
Rays Revolvers, see sig.
18x9 +24 =Needs 5-10mm spacer - 225 40 r18
18x10 +21 =Hella flush - 255 35 r18
Ride height = low
Scrapage = yes
Fenders need to at least be rolled/hammered.
18x9 +24 =Needs 5-10mm spacer - 225 40 r18
18x10 +21 =Hella flush - 255 35 r18
Ride height = low
Scrapage = yes
Fenders need to at least be rolled/hammered.
#1886
Instructor
VS XX fitment issue
Got some questions for the front with LS brakes
19x9 +26 standard disc will it clear LS brakes and flushed?
or
19x9 +21 Big Caliper disc will it clear LS brakes?
19x9 +26 standard disc will it clear LS brakes and flushed?
or
19x9 +21 Big Caliper disc will it clear LS brakes?
#1887
Lead Lap
iTrader: (1)
Join Date: May 2007
Location: FL
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
I found a great deal which is hard to pass up on a set of VSR 18x7.5 with a 40 offset. The kid is asking $250 for them and they are brand new in the box. The only thing that is stopping me is the width of 7.5. Any one have a rim this size on a sc300 or 400 other than stocks? What is the biggest size tire I can fit on these rims?
#1888
Pole Position
iTrader: (1)
Join Date: Jul 2008
Location: BC
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Looking at getting a set of Goodyear Eagle F1 GS-D3. I am running stock rims with 225/55ZR16. Am I able to put on 245/50ZR16? The section width increases from 9.1" to 9.8". Oh ya, that is on a 1992 SC400.
Last edited by mtnrat; 07-13-08 at 04:02 PM.