12-12-14, 04:39 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
05-30-08, 06:22 AM
#1848
Driver School Candidate
Join Date: Feb 2008
Location: NY
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
CL Member Name: Lex-fiend
Rim Brand and Type: Rota P45r
Rim Size f/r: 18"x9.5" all around
Rim Offset f/r: +20 all around
Tire Size f/r: 235/40 all around (slighty stretched)
Suspension Setup: Tein Basics
Comment On Ride: A little bumpy, much better handling with wider rims up front.
Fender Modifications: Rolled fronts, and slight roll on rears
Any other comments: I'm guessing between a 25-30 offset would not need fender/quarter mods.
Picture:
Overall
Rear passenger
Rear side shot
Front driver
Rim Brand and Type: Rota P45r
Rim Size f/r: 18"x9.5" all around
Rim Offset f/r: +20 all around
Tire Size f/r: 235/40 all around (slighty stretched)
Suspension Setup: Tein Basics
Comment On Ride: A little bumpy, much better handling with wider rims up front.
Fender Modifications: Rolled fronts, and slight roll on rears
Any other comments: I'm guessing between a 25-30 offset would not need fender/quarter mods.
Picture:
Overall
Rear passenger
Rear side shot
Front driver
06-02-08, 12:40 AM
#1853
Hacked CL to become a Mod
fender roll at the back definitely (maybe even a slight pull), but the front you maybe able to get by provided you get rid of the outer fender lining
Last edited by Kaydee; 06-02-08 at 12:46 AM.
06-02-08, 12:46 AM
#1855
Hacked CL to become a Mod
mine rubs only at dips with 18x8 29...not the entire lining, just that little plastic that clips on to the fender well...did not realize it was $50 brand new lol, could have sold it here haha
06-03-08, 07:42 PM
#1856
Lead Lap
Join Date: Oct 2006
Location: Madison WI
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
I am looking to buy some wheels this summer.
The ones I am looking at now are:
19 x 8.5(front) & 19 x 9.5(rear)
Offset : 32mm(front) & 35mm(rear)
with a 2.5" (front) & 3" (rear) lip.
I am wondering about tire size. I plan on getting coilovers and assume I'll have to do some rolling. I want to get close to flush by the time it's dropped.
Any suggestions on tires? I don't mind rolling fenders, but I'd rather not stretch tires. Any input is welcome.
The ones I am looking at now are:
19 x 8.5(front) & 19 x 9.5(rear)
Offset : 32mm(front) & 35mm(rear)
with a 2.5" (front) & 3" (rear) lip.
I am wondering about tire size. I plan on getting coilovers and assume I'll have to do some rolling. I want to get close to flush by the time it's dropped.
Any suggestions on tires? I don't mind rolling fenders, but I'd rather not stretch tires. Any input is welcome.
06-03-08, 10:28 PM
#1857
Hacked CL to become a Mod
just to let you know, those will NOT be real flush...but flush enough to make you happy. To be perfectly flush when dropped, you need offsets in the 20s...as for tires size, 235 front and 275 would be pretty good...check my sig for the unflushness I'm talking about
06-04-08, 09:07 PM
#1858
Driver School Candidate
Join Date: Jun 2008
Location: Florida
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
So I have been going through as many posts as possible but I need to be sure. I am planning on ordering a set of Axis Widetracks for my 94' SC400. I am not 100% sure if they will fit though, heres what I plan on getting.
- 18x8 w/ 90mm lip (front)
- 18x9 w/ 120mm lip (Rear)
Now on the website it says next to the size "et20" next to both of them. Is that the offset?, because that is the closest thing to offset that I can find on the wheels. Also if that is the offset will they fit. I measured from the hub and what I got from measuring is that they will only stick out half an inch from the fender on the rear and almost perfect flush fit on the front. I have a guy that will roll all my fenders for 150 bucks, and he does it for a living so im not worried about the paint getting messed up. From what I have been reading is that alot of you know what your talking about, so help me out please
- 18x8 w/ 90mm lip (front)
- 18x9 w/ 120mm lip (Rear)
Now on the website it says next to the size "et20" next to both of them. Is that the offset?, because that is the closest thing to offset that I can find on the wheels. Also if that is the offset will they fit. I measured from the hub and what I got from measuring is that they will only stick out half an inch from the fender on the rear and almost perfect flush fit on the front. I have a guy that will roll all my fenders for 150 bucks, and he does it for a living so im not worried about the paint getting messed up. From what I have been reading is that alot of you know what your talking about, so help me out please
06-05-08, 08:22 AM
#1859
So I have been going through as many posts as possible but I need to be sure. I am planning on ordering a set of Axis Widetracks for my 94' SC400. I am not 100% sure if they will fit though, heres what I plan on getting.
- 18x8 w/ 90mm lip (front)
- 18x9 w/ 120mm lip (Rear)
Now on the website it says next to the size "et20" next to both of them. Is that the offset?, because that is the closest thing to offset that I can find on the wheels. Also if that is the offset will they fit. I measured from the hub and what I got from measuring is that they will only stick out half an inch from the fender on the rear and almost perfect flush fit on the front. I have a guy that will roll all my fenders for 150 bucks, and he does it for a living so im not worried about the paint getting messed up. From what I have been reading is that alot of you know what your talking about, so help me out please
- 18x8 w/ 90mm lip (front)
- 18x9 w/ 120mm lip (Rear)
Now on the website it says next to the size "et20" next to both of them. Is that the offset?, because that is the closest thing to offset that I can find on the wheels. Also if that is the offset will they fit. I measured from the hub and what I got from measuring is that they will only stick out half an inch from the fender on the rear and almost perfect flush fit on the front. I have a guy that will roll all my fenders for 150 bucks, and he does it for a living so im not worried about the paint getting messed up. From what I have been reading is that alot of you know what your talking about, so help me out please
yea i believe et20 is the offset....yes they will fit, but you will have to roll fenders which you are already taking care of. So you should be fine.
06-05-08, 01:16 PM
#1860
Lexus Champion
iTrader: (17)
Join Date: Apr 2005
Location: Canoga 818 Park
Posts: 2,471
Likes: 0
Received 0 Likes
on
0 Posts
So I have been going through as many posts as possible but I need to be sure. I am planning on ordering a set of Axis Widetracks for my 94' SC400. I am not 100% sure if they will fit though, heres what I plan on getting.
- 18x8 w/ 90mm lip (front)
- 18x9 w/ 120mm lip (Rear)
Now on the website it says next to the size "et20" next to both of them. Is that the offset?, because that is the closest thing to offset that I can find on the wheels. Also if that is the offset will they fit. I measured from the hub and what I got from measuring is that they will only stick out half an inch from the fender on the rear and almost perfect flush fit on the front. I have a guy that will roll all my fenders for 150 bucks, and he does it for a living so im not worried about the paint getting messed up. From what I have been reading is that alot of you know what your talking about, so help me out please
- 18x8 w/ 90mm lip (front)
- 18x9 w/ 120mm lip (Rear)
Now on the website it says next to the size "et20" next to both of them. Is that the offset?, because that is the closest thing to offset that I can find on the wheels. Also if that is the offset will they fit. I measured from the hub and what I got from measuring is that they will only stick out half an inch from the fender on the rear and almost perfect flush fit on the front. I have a guy that will roll all my fenders for 150 bucks, and he does it for a living so im not worried about the paint getting messed up. From what I have been reading is that alot of you know what your talking about, so help me out please