Ali y0

tirerack doesnt list them

mitsuguy

iTrader: (2)

I know, I could never figure that out...

vntperform

iTrader: (15)

Ok,

How bout these:

18x9J+42 w/255-40-18
18x10+50 w/295-35-18

Will they fit?

Toshima

Look for different wheels with a lower offset. At lease in the 30's better in the 20's.

Blizzy

iTrader: (-1)

yes.

being worried about fitting wide tires, those are very appropriate widths and offsets.

You can't fit much wider tires than that under stock rolled fenders (275/315 is the highest I have ever seen). https://www.clublexus.com/forums/sho...d.php?t=275393

vntperform

iTrader: (15)

So everything should fit fine if I roll the fenders/quarters?

vntperform

iTrader: (15)

Hello? ANy help?

evileagle

How much clearance does the inside of the wheel to the strut housing have on stock wheels. Ive read almost through the whole fitment and tire guide and I didnt see anyone posting how much more room we have before you get too close to the struts. So im curious how much more can u go inwards on teh front and rears before you start rubbing the shocks in the rear or the fenderliner in the front?

VGnomore

iTrader: (1)

I know that in the rear with my setup (19x11.5+29 with 285/30) I have 5mm clearance between the strut and wheel (like a stock tt wheel) when the car is jacked up. I would like to know if switching to coilovers will give me more clearance for a widier wheel because I would love to ditch these for some 19x12.5+38ish w/305/25s s

TT6SPDSC

Anyone have any good fitment info for bigs-n-littles on the SC? Preferably Weld alumistars or pro stars? I've searched this thread, but I'm coming up empty....

Kohinoor

iTrader: (22)

youll need an extra inch of clearance on the inside. that could be achieved with a skinny coilover. dunno if a 305 will fit

fusion49

HI, long time follower... first time post (noob).

Ive been reading through this forum trying to get some insight on some wheel fitments for my SC but still confused. I currently have 18x7.5 all around and i have a super great deal on some 19X8.5 i want to put on.
I recently dumped the eiback pro kit springs and tokiko shocks and reverted my suspension back to stock and was wondering if this wheel size will fit without any mods (fender rolls) camber etc.. Also if you can recommend a tire size that would be a great help. I want the ride to be comfortable but also aggresive looking. I do have stock coils installed so there is no drop from the springs. THAnX again.

mitsuguy

iTrader: (2)

depends on offset, but 245/35-19 should work with most reasonable offsets...

fusion49

Thanx for the quick reply.

As for offsets (again im a noob) whats a recommendation on this stock setup or does it have entirely to do with the actual wheel? i do know my current wheels have spacers and they are pretty much flush.

mitsuguy

iTrader: (2)

in 8.5" all around you are going to want to be around +35... more in the back, realistically, but then you'd have to get into a staggered setup...