Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#901
Maintenance Moderator
iTrader: (2)
a 295/35-18 will be almost even with the wheel on a 10" wide wheel...
a 5 mm spacer might get what you are looking for... still doubt it's gonna fit without pulling the fender....
how well did your friends tires clear the fender? did you try compressing the suspension and still check
a 5 mm spacer might get what you are looking for... still doubt it's gonna fit without pulling the fender....
how well did your friends tires clear the fender? did you try compressing the suspension and still check
#902
Lexus Champion
iTrader: (-1)
Originally Posted by kaifiji
i tried a friends 17*9.5 +44 with 285/40/17 and they fit perfect, with enough clearence on the inside for 295's
A 10" rim with a +38 offset will offer the same inward clearance as a 9.5" rim at +44. However, a +38 offset will make it tough to fit a 295mm wide tire as mitsuguy barely fits a 275mm at +35.
Moral of the story: trying to fit 295's will not be easy. To fit a 10" wide rim, stay under a +40 offset.
#903
i don't see much difference in your setup and mine except that yours is +44 and mine is +45, i guess my allignment isnt up to specs. maybe i should do that first. or the offsets on this rims is stamped wrong!
#904
Lexus Test Driver
#905
Lexus Champion
Thread Starter
the kdw2s are also a good choice as mongol suggested
#907
Lexus Champion
iTrader: (2)
What's your tire recommendation for 18x10s all around?
1. The off set will be +24 all around.
2. The car is lowered with Tein Basics.
3. Fenders will be rolled. Want to avoid pulling/shaving.
Will 245-35 front and 245-40 rear work? (Some recommended 235-40 front)
Yes, I know it will be stretched, but I do not want it to be super stretched.
Also, I will most likely get BFG g-Force T-A KDW.
Thank you for your help in advance.
Pictures of my new wheels will be posted tomorrow. yay!
1. The off set will be +24 all around.
2. The car is lowered with Tein Basics.
3. Fenders will be rolled. Want to avoid pulling/shaving.
Will 245-35 front and 245-40 rear work? (Some recommended 235-40 front)
Yes, I know it will be stretched, but I do not want it to be super stretched.
Also, I will most likely get BFG g-Force T-A KDW.
Thank you for your help in advance.
Pictures of my new wheels will be posted tomorrow. yay!
#908
Maintenance Moderator
iTrader: (2)
What's your tire recommendation for 18x10s all around?
1. The off set will be +24 all around.
2. The car is lowered with Tein Basics.
3. Fenders will be rolled. Want to avoid pulling/shaving.
Will 245-35 front and 245-40 rear work? (Some recommended 235-40 front)
Yes, I know it will be stretched, but I do not want it to be super stretched.
Also, I will most likely get BFG g-Force T-A KDW.
Thank you for your help in advance.
Pictures of my new wheels will be posted tomorrow. yay!
1. The off set will be +24 all around.
2. The car is lowered with Tein Basics.
3. Fenders will be rolled. Want to avoid pulling/shaving.
Will 245-35 front and 245-40 rear work? (Some recommended 235-40 front)
Yes, I know it will be stretched, but I do not want it to be super stretched.
Also, I will most likely get BFG g-Force T-A KDW.
Thank you for your help in advance.
Pictures of my new wheels will be posted tomorrow. yay!
#911
Lexus Test Driver
Alright folks...I need a difinitive answer:
I am running 17x9 +45 in the rears, lowered on ESPELIR and TOKICO..will a 275/40 RUB without fender mods? I need to know for sure before I spend money of rolling the fenders if it's gonna be unnecessary...Please help!
I am running 17x9 +45 in the rears, lowered on ESPELIR and TOKICO..will a 275/40 RUB without fender mods? I need to know for sure before I spend money of rolling the fenders if it's gonna be unnecessary...Please help!
The following users liked this post:
TitanG545 (07-25-20)
#913
Lexus Test Driver
I think you'll be fine without rolling but why such a wide tire, i think 265's are fine on 17x9.
#914
Lexus Test Driver
What's your tire recommendation for 18x10s all around?
1. The off set will be +24 all around.
2. The car is lowered with Tein Basics.
3. Fenders will be rolled. Want to avoid pulling/shaving.
Will 245-35 front and 245-40 rear work? (Some recommended 235-40 front)
Yes, I know it will be stretched, but I do not want it to be super stretched.
Also, I will most likely get BFG g-Force T-A KDW.
Thank you for your help in advance.
Pictures of my new wheels will be posted tomorrow. yay!
1. The off set will be +24 all around.
2. The car is lowered with Tein Basics.
3. Fenders will be rolled. Want to avoid pulling/shaving.
Will 245-35 front and 245-40 rear work? (Some recommended 235-40 front)
Yes, I know it will be stretched, but I do not want it to be super stretched.
Also, I will most likely get BFG g-Force T-A KDW.
Thank you for your help in advance.
Pictures of my new wheels will be posted tomorrow. yay!
235/40 front and 245/40 rear would be a perfect fit. Is the car for normal driving or some race oriented?