Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#421
Lexus Test Driver
iTrader: (22)
Originally Posted by cherplex
that will fit but you gonna have to do fender mods. The other SC you took the pics with has specs close to that.
yea thats my buddy's car.. if it was a 19x10 +26 like his i know i could make it fit.. im just a little hesitant because its a 19x10.5.. will that half inch be a big deal?
#422
No Sir, I Don't Like It
iTrader: (4)
Well on topic of my previous post, my buddy and 2 others say that the 245 50 R16's will fit on my rims which currently seat 225 55 R16's......anyone have any opposing views?
Scratch this post, i checked on the back rim which verified everything...... 16 x 7 ....gay....
Scratch this post, i checked on the back rim which verified everything...... 16 x 7 ....gay....
Last edited by Jewtheist; 04-17-06 at 07:42 PM.
#423
Originally Posted by jibbby
Roo- I was talking about the blue nissan and the rear wheels on your SC, I see there is tiny rear fender lips and without that I think the rims would really stick out and look funny and yes my rims and tires can hold my horsepower claims... Just dump the wheel spacers and you be good to go....Anything else my friends?
Originally Posted by TurboTeg
I don't think Roo is running adapters/spacers. Just nice aggressive Volk GT-C. Looking badass as usual Roo.
I've seen other pics of that blue s14 and although I love aggressive wheel fitment, the front always looks odd to me. I think he should get a pair of more conservative front wheels.
I've seen other pics of that blue s14 and although I love aggressive wheel fitment, the front always looks odd to me. I think he should get a pair of more conservative front wheels.
18x10+24 255/35/18 (Vertex +25mm fenders)
18x11+19 265/35/18 (fenders rolled and pulled)
On Steve's S14, he has 0 faces on the front which required spacers to clear his calipers. It's more than an extreme fitment, it's insane. I couldn't rock that on my own car but I give him props for doing it.
Originally Posted by O. L. T.
You guy's have done a pretty good job of keeping the thread on topic and not causing a debate. 410 posts of mostly quality stuff here.
Mongoose, you're a good guy so don't let an opinion turn into an argument. I think your point has been made quite clearly on your stance, and that's the end of it.
Since this thread has been going along so well for so long we are going to start handing out temp bans for any strife brought into it from this post forward.
It's nice to see a good long thread with good info keep going so rather than lock it, we'll just start eliminating the problem.
Keep it going.
Mongoose, you're a good guy so don't let an opinion turn into an argument. I think your point has been made quite clearly on your stance, and that's the end of it.
Since this thread has been going along so well for so long we are going to start handing out temp bans for any strife brought into it from this post forward.
It's nice to see a good long thread with good info keep going so rather than lock it, we'll just start eliminating the problem.
Keep it going.
1.) Could you just start deleting posts like what mongoose posted? This thread is supposed to be informative and helpful. Unfortunately, posts like his are turning the thread into "hot or not" for wheels. One liner posts with nothing to contribute to the thread other than a disrespectful opinion don't do anyone any good and most likely discourage others from posting pictures and specs.
2.) Can a brotha get a sticky?! This is probably one of the most interesting and informative threads on club lexus....
#424
ACleanSC4,
Thank you for the information.
You didn't mention tire size, or if you've rolled/trimmed/pulled your fenders.
I want to run 1-2 fingers over the tire, no pulling, no rolling (if I can get away with it).
No rubbing is also important
Still think the 20's offsets are what I want?
Has anyone seen these rims on an SC?
Thanks
Thank you for the information.
You didn't mention tire size, or if you've rolled/trimmed/pulled your fenders.
I want to run 1-2 fingers over the tire, no pulling, no rolling (if I can get away with it).
No rubbing is also important
Still think the 20's offsets are what I want?
Has anyone seen these rims on an SC?
Thanks
#426
Loves Snickerdoodles!
...
Such an informative post guys. I have first gen GS3 which runs similar offsets to the SC. Now, thanks to this thread, I have guidelines and parameters to work off of. So now I guess it's time to search for new wheels!. Oh and by the way, I'm not the conservative type when it comes to offsets either!
#429
Originally Posted by Seize
Such an informative post guys. I have first gen GS3 which runs similar offsets to the SC. Now, thanks to this thread, I have guidelines and parameters to work off of. So now I guess it's time to search for new wheels!. Oh and by the way, I'm not the conservative type when it comes to offsets either!
#433
Lexus Champion
iTrader: (2)
Originally Posted by SC299+1
What suspension are you running how do you like it? Looks great!
new'er pics than what was posted earlier.
have about an inch gap between tire and fender, i could go lower but that would be crazy considering the bodykit and that the car is a daily driver.
#434
I'm looking at getting some SSR D5R 19" Bronze Wheels. Front: 19x8.5 +30mm and Rear: 19x10 +37mm. I'm not sure what size tires to run, maybe 245-255 in the front and 275-285 in the rear? So, if you guys could help me with that I would really appreciate it. I have a full Vertex Aero Kit including the aero fenders. I've been looking at pics and reading but I'm still not sure how these wheels will fit. I want to try to stay away from any fender modifications if possible. Thanks!!!
#435
Originally Posted by PokeAutio
I'm looking at getting some SSR D5R 19" Bronze Wheels. Front: 19x8.5 +30mm and Rear: 19x10 +37mm. I'm not sure what size tires to run, maybe 245-255 in the front and 275-285 in the rear? So, if you guys could help me with that I would really appreciate it. I have a full Vertex Aero Kit including the aero fenders. I've been looking at pics and reading but I'm still not sure how these wheels will fit. I want to try to stay away from any fender modifications if possible. Thanks!!!
im no expert on wheel fitment, or nearly as knowledgable as the other members on this thread, just my opinion.