Brennen01

skylark, thanks for the reply... im going to do 25 to be safe and hope it clears !!

Brennen01

nnnickkk, I am running 18x9 +24 and 18x10.5 +22 if you PM your number I can text you some pics I cant upload any right because im at work

TWOJZPOWA

MST MT01 18x9.5 +35et all around. Running on Kuhmo 245/45R18 all around. TRD center caps.
No spacers. Lowered on coilovers.

Ziamark

TWOJZPOWA Your car looks stunning.

nnnickkk

iTrader: (2)

@TWOJZPOWA what coilovers are you on?

TWOJZPOWA

Tein Basic. Will be upgrading to Tein Flex Z, rolling fenders, and running 265 up front and 285 rear.

YotaSC400

Anyone know if these TRD 19x8" will fit with supraTT/LS400 brakes?

OmgSc400

twins! And in alberta?!

YotaSC400

Yep, I'm in Alberta

OmgSc400

Whereabouts in Alberta?

YotaSC400

Small town in between Calgary and Red Deer

OmgSc400

Nice nice, its always cool to see another 97+ around!

YotaSC400

Unfortunately those aren't pix of my car, I got a 95' green sc400......and those same rims sitting in the shop but I dunno if they will clear the supra TT calipers?

TWOJZPOWA

So I managed to get Nankang 265/35r18 on the front today after work. Running -3 degrees camber with no fender liner. No rubbing. After I roll the fenders, I will run less camber.

(Wheels: MST MT-01 18x9.5 et35) (Lowered on Tein Basic coilovers)

mobedat

SC400 - 1993
Weels: 18" LENZO (COPY) X 8" and +37 offset no rubbing no fender mods
Tires: Roadestone 18 X 225 X 40 and planning to switch to 18 X 225 X 45 to reduce the speedo error
Coilovers: MEGANS EZ-Street, zero preload and damper is on the fifth click.
because it is lowered I couldn't maintain the recommended camber degree (Zero) and the best i could done is (- 2) using the stock cambers.
smooth ride little bit tif, all in all beautiful cruise experience. i'm in love with this baby.