Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#3796
Driver School Candidate
Hi CalitriSC,
thanx for your speedy reply!
I know, there is plenty of 19/20" out there, but I don't want to loose ride-quality.
The LS still needs to be able to pull DDD (DailyDriverDuty)!
I got some replies over on the LS-corner: General concern seems to be brake clearance if the offset is not at least 35mm...??
Though I saw at least one SC with Saleen style 17" and 18" wheels, which have a rather low offset of 22-24mm.
I wonder if these still clear the 98LS brakes??
Cheers,
thjakits
thanx for your speedy reply!
I know, there is plenty of 19/20" out there, but I don't want to loose ride-quality.
The LS still needs to be able to pull DDD (DailyDriverDuty)!
I got some replies over on the LS-corner: General concern seems to be brake clearance if the offset is not at least 35mm...??
Though I saw at least one SC with Saleen style 17" and 18" wheels, which have a rather low offset of 22-24mm.
I wonder if these still clear the 98LS brakes??
Cheers,
thjakits
#3797
Driver School Candidate
Join Date: Dec 2011
Location: Indiana
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Wow CalitriSC the car is gorgeous. I have a few questions how much pulling/rolling did you do on the quarter panels and what tire size did u run front and rear? Also what brand is that upper spoiler it looks really nice on the car
#3798
Lexus Champion
iTrader: (13)
Thanks. The rear fenders are rolled flat with the inner fender also hammered flat. The front fenders are rolled flat with a slight pull. The frame above the front wheels is hammered flat. And my wire harness is relocated into the engine bay. On those wheels I had 215/40/18 front and 255/35/18 rear. But those tires were Federals which run very wide. So more like a 225 and 265
#3810
Looking to get a set of wheels from a member of the site and was wondering if this set up will work on a stock Sc400.
The fronts are 20x8.5 16 offset 245/35
Rears 20x10 15 offset 285/30.
The fronts are 20x8.5 16 offset 245/35
Rears 20x10 15 offset 285/30.
Last edited by Powerline; 01-04-12 at 01:22 AM. Reason: mispelling