going Carbon Fiber crazy!!
01-09-05, 09:57 AM
#46
Originally Posted by inovashn
cleansc4 how did you get the middle of the dash pieces off. i had my dash torn apart like 6 months ago putting all the electronics in and my main goal was to replace or change the mid section of the wood trim. i wrapped the doors in black vinyl and wanted to do the same for the middle but couldn't find anyway in hell to get them off. oh and yes i did plenty of searching on the forum but to no avail. any help would be greatly appreciated.
01-09-05, 08:42 PM
#49
Lexus Test Driver
Join Date: Apr 2002
Location: Wisconsin
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
Reggik,
The vents and wood are NOT the same peice if that is what you meant. I took the wood off my 92, and my 95 and they are just bolted on the back side of the dash. It MAY be possible to get the wood off without taking the dash off, but I am not sure.
As for the CF... I bought these peices from ACLEAN.. I actually started installing them yesterday... I will have pics of the door panel tomorrow hopefully for you all to see...... on black interior
The vents and wood are NOT the same peice if that is what you meant. I took the wood off my 92, and my 95 and they are just bolted on the back side of the dash. It MAY be possible to get the wood off without taking the dash off, but I am not sure.
As for the CF... I bought these peices from ACLEAN.. I actually started installing them yesterday... I will have pics of the door panel tomorrow hopefully for you all to see...... on black interior
01-09-05, 08:46 PM
#50
Intermediate
alright then turbosc how do you get them off. i looked everywhere under the dash. first of all the whole bottom of my dash was apart not just part of it. second i couldn't really get my hands up there to the vents, and thirdly when and what i did feel just didn't seem like the rhyme or reason of how to get the wood off. it you could share some light on the subject that would be awesome. i could finally stop loosing sleep at night. jk
01-09-05, 08:51 PM
#51
Lexus Test Driver
Join Date: Apr 2002
Location: Wisconsin
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
I will take some pics of the back part of the dash tomorrow where the wood bolts on to the dash
It would be super hard to take it off, if not impossible to take the wood off with the dash ON IMO.
It would be super hard to take it off, if not impossible to take the wood off with the dash ON IMO.
01-09-05, 08:55 PM
#52
Originally Posted by TurboSC
Reggik,
The vents and wood are NOT the same peice if that is what you meant. I took the wood off my 92, and my 95 and they are just bolted on the back side of the dash. It MAY be possible to get the wood off without taking the dash off, but I am not sure.
As for the CF... I bought these peices from ACLEAN.. I actually started installing them yesterday... I will have pics of the door panel tomorrow hopefully for you all to see...... on black interior
The vents and wood are NOT the same peice if that is what you meant. I took the wood off my 92, and my 95 and they are just bolted on the back side of the dash. It MAY be possible to get the wood off without taking the dash off, but I am not sure.
As for the CF... I bought these peices from ACLEAN.. I actually started installing them yesterday... I will have pics of the door panel tomorrow hopefully for you all to see...... on black interior
01-10-05, 11:24 AM
#54
When I had my car in pieces I looked at the wood trim pieces. It looked like there were tiny little gold screws with a weird head that were holding the wood in. Bear in mind this was 4 months ago so I may be incorrect.
I didn't see any obvious ways to remove it but I would be interested in seeing how it is done.
TurboSC - hey man - look forward to seeing the pictures.
Peace,
Jonny
I didn't see any obvious ways to remove it but I would be interested in seeing how it is done.
TurboSC - hey man - look forward to seeing the pictures.
Peace,
Jonny
01-11-05, 07:05 PM
#58
Lexus Champion
Join Date: Jul 2004
Location: the mansion in Holmby Hills......
Posts: 1,680
Likes: 0
Received 0 Likes
on
0 Posts
Hey Johnny, lets do this to your ride...... AFTER THE WIRING!!! argh, its gonna be cold this weekend,. damn this Oklahoma weather.
anyway, Johnny call me Thursday and let me know what you want to do, I have a space heater we can use if you want to pull the car into the garage.
Josh
anyway, Johnny call me Thursday and let me know what you want to do, I have a space heater we can use if you want to pull the car into the garage.
Josh
