Injectors?
#1
Driver
Thread Starter
Join Date: Feb 2001
Location: Kentucky
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know the stock flow size of the fuel injectors?? ON the V8, 440cc??
What about Supra TT?? 550cc??
Could the stockers be swapped with 8 Supra TT Injectors? I have heard of boring out injectors but I would rather use some factory stuff it it would work..
I think stock supra injectors are good up to 500hp+ on a Supra, Aren't they??
SC400NOS ran a 13.5 last weekend, he's getting a TC in about 2 weeks, with that he should hit 12's. Especially if Traction does not become a problem. All for under 1500 bucks?? Not bad. He thinks he is spraying about 100hp right now.
He is looking for some new injectors and I thought that the supra ones might work.
What do you all think?? Will the injectors work? Are they "Plug-n-Play"??
C-ya,
Scott
What about Supra TT?? 550cc??
Could the stockers be swapped with 8 Supra TT Injectors? I have heard of boring out injectors but I would rather use some factory stuff it it would work..
I think stock supra injectors are good up to 500hp+ on a Supra, Aren't they??
SC400NOS ran a 13.5 last weekend, he's getting a TC in about 2 weeks, with that he should hit 12's. Especially if Traction does not become a problem. All for under 1500 bucks?? Not bad. He thinks he is spraying about 100hp right now.
He is looking for some new injectors and I thought that the supra ones might work.
What do you all think?? Will the injectors work? Are they "Plug-n-Play"??
C-ya,
Scott
#2
man, I'm trying to look for that article regarding the injectors on the V8 I think they are way small and maxed out. I think Mean Gene in the GS forum knows a lot about this. Ask him there.
Mind
Mind
#3
The stock injectors on my GS400 are 275cc. I had them replaced with 440cc RC Engineering injectors that work quite well at all rpm's. As a matter of fact I can't tell the difference in driveablity between the two.
I think my 440cc should be good to about 450rwhp but Mo should know better then I.
I think my 440cc should be good to about 450rwhp but Mo should know better then I.
#4
Guest
Posts: n/a
stock injector size
I just got off of the phone with RC Engineering in Cali and they told me the stock injector size was 240cc. I thought it sounded a bit small but that is what there computer said. He told me he could sell me some injectors that were rated at 310cc which was good for 450HP for $85 per injector and with that size he said I would not have to do anything to the ecu.
Later
Later
#5
Found injector information
email me:
I got info on the injectors you need.
1UZ-FE has 251cc/min injectors
I can give you a cross reference for plug and play injectors.
Mindflux90@hotmail.com
I got info on the injectors you need.
1UZ-FE has 251cc/min injectors
I can give you a cross reference for plug and play injectors.
Mindflux90@hotmail.com
Last edited by mindflux; 04-14-01 at 01:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Joe C
2Gen GS430 / 400/ 300 Classifieds (98-05)
3
02-13-07 08:27 AM