bushings for RX330
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2017
Location: Manitoba
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
bushings for RX330
I have a clunk in the rear end of my 04 Lexus RX330. My mechanic says it is the Bushings that need to be replaced in the rear Sub axle carrier assembly. some of the forums have talked about replacing the bushings instead of the whole carrier assembly. My mechanic has ordered the bushings from 2 different suppliers but they were the wrong size both times. He does not know where to find them so he is talking about replacing the whole Carrier assembly. there was a really good posting from 2011 showing how one Lexus owner changed out these bushings which he got from a supplier in Ireland. But as best I can tell there were the wrong size bushing for my LExus SUV. Does anyone know where I can get the right bushings . thanks
#2
Lexus Champion
#3
Driver School Candidate
Thread Starter
Join Date: Feb 2017
Location: Manitoba
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Bushings for LExus RX330 AWD
OK The Toyota/Lexus Part source calls the Knuckles Carrier Sub-assembly-rear axle Left side # 4230548031 & right side #423044801
VIN JTJHA31U840004593
Detail model » LEXUS RX330/350(JPP) OK
Detail model » LEXUS RX330/350(JPP) OK
Detail model » LEXUS RX330/350(JPP)
VIN JTJHA31U840004593
Detail model » LEXUS RX330/350(JPP) OK
Detail model » LEXUS RX330/350(JPP) OK
Detail model » LEXUS RX330/350(JPP)
Thread
Thread Starter
Forum
Replies
Last Post
BayAreaLex
GS - 2nd Gen (1998-2005)
12
11-05-12 03:59 PM
en11871
LS - 1st and 2nd Gen (1990-2000)
3
02-26-08 08:27 PM