Calibrate distance to empty calibration
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2017
Location: Fl
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Calibrate distance to empty calibration
We had our 07 rx350 dash replaced at a dealership due to a recall on it. Afterwards the electronics were a bit off and they had to keep the car an extra day to get the Bluetooth to work correctly among other things. We realize now that the DTE calibration is off. When we fill the tank it reads 275 on the DTE. Before the dash replacement it would always read 325 on the DTE upon fill up. Is there a way to fix this? Now it is reading really low DTE when we still have a quarter tank left. Is it back to the dealership we go or is there a way to calibrate it?
#2
My does that after a battery unplug. It takes a few full tanks for it to recalibrate. take a road trip and fuel up twice and see if the dte goes up. If not take it back to the shop
Thread
Thread Starter
Forum
Replies
Last Post
kens97sto
LS - 1st and 2nd Gen (1990-2000)
2
11-23-07 10:29 AM