rns

Hi!
I replace bushings but they were fine, not the cause of noise. My noise came from broken axle bearing and partly also from loose rusty alignment bolt. https://www.clublexus.com/forums/rx-...ment-bolt.html

Added picture of bolt that needed to replace, it had rusted.

GoodAndYou

Thanks for the feedback. Sounds like I need to get under there and start doing some investigating to see if I can figure out the source.

dnguyen_GS430

Hi,

Do you know if this fits my 2001 GS430. I have random clunking noise this may be the problem. However, Lexus sell a complete kit includes the lower arm.

thomas1

Has anyone any experience with the Febest 4221020010 - Arm Bushing (for Rear Assembly) For Toyota - Febest aftermarket bushing?

rns

When I replaced mine I put Febest other side as I had bought only one Oem Toyota bushing. My clunk noise reappeared (although noise source was not these bushings) about 2 months, this Febest had failed. So I can't recommend it, not so much cheaper than original.
And I had to grind it's surface too to make it fit, the diameter was slightly bigger.

hypervish

Febest is junk from what I've read; IMO, stay away!

thomas1

Thank you gentlemen, I will not buy the Fesbest bushings than. OEM will be it.

LSBen

I know I need this.

anthonyini

Guys, are these bushing same as (ADUD 505)

thx

RedGemini

I'm curious as to which FEBEST bushing was tried. There seems to be two different ones that can be used. The first one is much cheaper than the second ($11 vs $18). I'm curious if the second one is a newer style that's more reliable.

EDIT: It appears the one mentioned by rns is the second one, TAB-166Z.

nwjetboat1

Absolutely fantastic post! Saved me a ton of money and work. The bushing part number is priceless. Thank you so much for sharing.

edwardh11

isthis for 2 wd or 4 wd?

nwjetboat1

My particular RX350 was an AWD. I used the OEM bushing originally indicated at the start of this thread. This bushings are 42210-20010.

IamNewfie

Good day, I looking for the right rear lower knuckle bushing for my Lexus RX400h but my Toyota dealer says I can't buy the bushing alone I must buy the bushing and knuckle assembly together (Part # 42304-48051 ($558.60 CAD)). However, my mechanic says I should be able too buy the bushing separately. So, I guess I'm looking for a bushing for part number 42304-48051 (bushing and knuckle assembly). After reading this thread last night I'm hoping that Part # 42210-20010, identified here, will fit. Can someone please confirm that Part # 42210-20010 is the correct one. My dealer says it cost $97.17 CAD and only fits the Avalon and Celica. I would really appreciate it if someone could confirm. Thanks.

anthonyini

Hello all,
Please check my image and tell me if the given OEM bush will fix this area of bushing??? i believe marked area is called trailing arm bushing

Thank you