Bluetooth and Call Waiting
#1
Pole Position
Thread Starter
Join Date: Jan 2006
Location: CT
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Bluetooth and Call Waiting
when i am using my RAZR with my 06 rx330 and i have an incoming call on call waiting there is a problem.
if i do not answer the call when it beeps in i lose both calls when the second caller gets pushed to voicemail
am i missing something?
also i only have had caller id on my screen twice out of about 100 calls, is there something i am missing here too?
if i do not answer the call when it beeps in i lose both calls when the second caller gets pushed to voicemail
am i missing something?
also i only have had caller id on my screen twice out of about 100 calls, is there something i am missing here too?
#2
I had a similar problem with my Sprint Treo 650 until they upgraded the firmware in the phone. And as far as the caller ID goes, you have to be stopped, or moving very slowly, for it to appear. When you're moving fast enough for the touch screen buttons to gray out, you're moving too fast for the caller ID to display, it seems.
#3
Pole Position
Thread Starter
Join Date: Jan 2006
Location: CT
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jayskinner
I had a similar problem with my Sprint Treo 650 until they upgraded the firmware in the phone. And as far as the caller ID goes, you have to be stopped, or moving very slowly, for it to appear. When you're moving fast enough for the touch screen buttons to gray out, you're moving too fast for the caller ID to display, it seems.
i figured it was something on the phone side, i bought my phone online and installed my SIM chip into it, ill bring it to cingular and see what they can do
as far as the caller id goes would that mean that if i did the wire cut mod to have the phone work at all speeds that i would always see the caller id?
Thread
Thread Starter
Forum
Replies
Last Post
iluvls460
LS - 3rd Gen (2001-2006)
1
02-19-08 07:10 PM