steelgtr

Hi Guys,

I am only getting air from the dash panel vents, no floor vent or defrost vents. The icon changes on the display but the air flow is stuck on dash. I can hear a faint relay click from down below but air flow doesn't change.

Any ideas?

thx

bob

JAB

Use the search function to find numerous threads on mode servo diagnosis and repair.

steelgtr

Nothing to search for

JAB

Not sure what's going on here. It appears that some useful links are no longer recognized. Use Google instead; search for 'RX300 mode servo' and you will find helpful info.

JAB

Just realized that much of this had been moved to the 'RX300 DIY' sticky. On this subject, check out post # 11.