how to put on headers.. 00 RX300
11-11-11, 12:40 PM
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2011
Location: il
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
how to put on headers.. 00 RX300
ok so my grandmas 2000 rx3000 had some problem deep inside the engine. my dad fixed it and now needs help putting the headers back on. he doesnt know in which order (left to right) you screw the bolts back on. [example: you screw, 3.4.1.2] also he needs to know what torque it should be screwed on as well. please help me. i am in desperate help becuase hes riding my @ss -__-
THANK YOU!!!
THANK YOU!!!
11-12-11, 08:37 AM
#2
Super Moderator
ok so my grandmas 2000 rx3000 had some problem deep inside the engine. my dad fixed it and now needs help putting the headers back on. he doesnt know in which order (left to right) you screw the bolts back on. [example: you screw, 3.4.1.2] also he needs to know what torque it should be screwed on as well. please help me. i am in desperate help becuase hes riding my @ss -__-
THANK YOU!!!
THANK YOU!!!
Those exhaust manifolds don't have any kind of screw bolt order. Screw them in one by one until they are all on there (but not fully tightened). The final torque is: 49 N-m (500 kgf-cm, 36 ft-lbf).
11-12-11, 08:50 AM
#3
Moderator
For large surfaces/objects, best procedure is to face all nut/bolts and then tighten from center to out.
Salim
Salim
Thread
Thread Starter
Forum
Replies
Last Post
KC95SC400
Performance & Maintenance
42
07-03-08 05:54 AM
