Shout Out To PK Auto Design!!
#16
Instructor
Thread Starter
Ancdefghijk
Last edited by GunnyFitz; 03-09-19 at 02:11 PM.
#18
Pole Position
Personally don't know anything about Carbotech but I hear they're relatively cheap alternative to OEM.
I personally prefer the Endless MX72,I drive and brake hard though, and it works for track too.
If you're not going to be tracking and/or driving hard but still want good performance & less brake dust check out project mu pads.
At the end of the day pads are really dependent on the ambient temp where you're at and your driving style.
I personally prefer the Endless MX72,I drive and brake hard though, and it works for track too.
If you're not going to be tracking and/or driving hard but still want good performance & less brake dust check out project mu pads.
At the end of the day pads are really dependent on the ambient temp where you're at and your driving style.
#19
Instructor
Thread Starter
Abcdefghijk
Last edited by GunnyFitz; 03-09-19 at 02:11 PM.
#20
Does this go against your better judgement Rolla? Please explain, Im unsure if this is good or bad?
Thanks John.
Hmm, never considered that part when I selected them.
Regarding "Lowering" which trust me, you are not the only person who's said this. I already decided that I wont be going w any Coil Overs BUT would be interested in seeing some ideas on Lowering Springs!
Totally open to suggestions, with these thoughts though...
I DO want a classy look that compliments the car n wheels so fire away with links to products, etc yoos guys!
(I know my man Josh will be jumpin in here!)
Ps. I most definitely need to add this!!
PLEASE for the love of William Wallace tell me there are different Brake Pads that do not spit out so much damn dust!! (And I'm not starting a Thread about it either!) lol
Thanks John.
Hmm, never considered that part when I selected them.
Regarding "Lowering" which trust me, you are not the only person who's said this. I already decided that I wont be going w any Coil Overs BUT would be interested in seeing some ideas on Lowering Springs!
Totally open to suggestions, with these thoughts though...
- I do NOT want to be the guy crawling over speed bumps.
- I do NOT want a super aggressive look / stance
- I do NOT want to only be able to slip paper thru wheel well.
- I do NOT want to look like a bowlegged Sailor from behind
- I do NOT want to only be able to slip paper thru wheel well.
- I do NOT want a super aggressive look / stance
I DO want a classy look that compliments the car n wheels so fire away with links to products, etc yoos guys!
(I know my man Josh will be jumpin in here!)
Ps. I most definitely need to add this!!
PLEASE for the love of William Wallace tell me there are different Brake Pads that do not spit out so much damn dust!! (And I'm not starting a Thread about it either!) lol
Air suspension is the way to go 👍🏻I used to be slammed and all of that good stuff on my IS350 but its honestly more hassle than its worth. You get the best of both worlds - hard park frame to the floor and just raise it back up when you have to go
The following users liked this post:
PK Auto Design (05-17-18)
#21
#22
Instructor
Thread Starter
Ancdefghijk
Last edited by GunnyFitz; 03-09-19 at 02:12 PM.
#24
Thread
Thread Starter
Forum
Replies
Last Post
350PsDMeuP
Wheels and Tires Classifieds
4
01-21-08 12:37 PM