Invidia midpipe doesn't fit on stock axle back
 

I wanted to do the resonator delete but did not want to completely void the warranty. Therefore, I bought the invidia q300 midpipe from a user on this forum and figured it would bolt straight on to the stock axle back. This was not the case, at least with the parts that I had. It should have been obvious that the Invidia midpipe is larger than the stock one and it would be difficult to install it. I probably could have tried other things to get it to work. The invidia midpipe flange was too big for the stock axle back leaving a big gap and the bolt that holds the midpipe to the axle back was too short for the big gap difference. I gave up and just reinstalled the stock midpipe and will look to purchase the axle back soon. Just a heads up for anyone trying to do the midpipe only.

where you located?
i did the res delet on the stock but I may be on the verge of buying a Borla.Cat back. Id swap ya mid pipes if you pickup or pay all shippings

Im in Columbus Ohio

I'm in Arizona. I'm going to look for the axle back to go with the invidia midpipe.

See attached.

Lou

thx Lou, the mobile view didnt reveal that.
https://cimg9.ibsrv.net/gimg/www.clu...df44d259b3.jpg

Invidia doesn't offer just the midpipe, could be for that reason!

-Josh