When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi, all done without heat...just stretch with flash the rear before the cover attached before and after all wrapped and glued up
I used 3m reflective wrap, Acura RDX brake caliper covers, and they are attached with Permatex red high temp silicone.
is this the right part number for the Acura RDX caliper cover ? 45218-TX4-A00
Acura 45218-TX4-A00 That is it. Just search Acura RDX caliper covers and check all the pics of how these covers have been used for the past 6 -7 years. Next is my wife's RX 350.
I didn't know you could wrap a caliper. I'm assuming it's been holding up pretty good?
I've always powder coated my calipers but if the wrap holds up that is a much easier install than removing the calipers and sending them to get coated.
Hi, all done without heat...just stretch with flash the rear before the cover attached before and after all wrapped and glued up
I used 3m reflective wrap, Acura RDX brake caliper covers, and they are attached with Permatex red high temp silicone.
silly question but, why did you use 'Acura RDX' caliper covers?
silly question but, why did you use 'Acura RDX' caliper covers?
My guess would be that he wanted to add the "Lexus" vinyl decal. The stock rear calipers are oddly shaped without much flat space to add something like that. The Acura covers allowed for that.
My guess would be that he wanted to add the "Lexus" vinyl decal. The stock rear calipers are oddly shaped without much flat space to add something like that. The Acura covers allowed for that.
YES, THAT'S IT....the rear calipers look weak and the covers give them a solid appearance....
10-14-18, 01:31 AM
Calipers Wrap and Acura Covers
