RC350: Post Your Aftermarket Wheel Fitment and Tires
#62
Former Sponsor
#63
Former Sponsor
#64
#65
Former Sponsor
#66
Technically not aftermarket wheels, but not stock to an RC 350. These are take offs from an RC F. They are new and I purchsed the wheels AND tires for $1700 out the door. They fill in the fenders well, especially the rears. Will be lowering the car next week. I will post pics then as well. The wider RC F tires fit with no rubbing issues.
Tires: Michelin Pilot Super Sports
Front: 255/35/19
Rear: 275/35/19
Wheels: BBS Lexus wheels
Overall weight savings is 40LBS for new wheel and tire combo compared to stock wheel/tire combo.
Tires: Michelin Pilot Super Sports
Front: 255/35/19
Rear: 275/35/19
Wheels: BBS Lexus wheels
Overall weight savings is 40LBS for new wheel and tire combo compared to stock wheel/tire combo.
Last edited by chikindadd; 02-03-17 at 05:23 PM.
#67
#68
The following users liked this post:
mcenteep (12-30-19)
#71
#73
I've been running the following for over a year while lowered on BC coils, no rubbing/issues. Previously was on RSR springs:
Work Wheels Zeast ST1
20x9 +38 245/35/20
20x10.5 +45 275/30/20
Work Wheels Zeast ST1
20x9 +38 245/35/20
20x10.5 +45 275/30/20
The following users liked this post:
mistermatt (06-14-20)
#74
#75
Driver
iTrader: (2)
All of your cars look great! I just built 19x10 F and 19x11.5 rear, on an awd rc350. I will release the specs for those who are interested in a very aggressive setup, but it will take commitment.
Tire sizes are 235/35/19 & 275/30/19. 25.5 rolling diameter, 3.2" sidewall, 0% variance, and section widths to an even stretch front to rear.
More into lets fit the biggest wheel possible, and these cars fit alot under the body. Once these wheels are on I will be building a 10.5/12" setup on 245 & 285.
Must have:
coils w custom spring rates
camber arms
no roll or pull
Tire sizes are 235/35/19 & 275/30/19. 25.5 rolling diameter, 3.2" sidewall, 0% variance, and section widths to an even stretch front to rear.
More into lets fit the biggest wheel possible, and these cars fit alot under the body. Once these wheels are on I will be building a 10.5/12" setup on 245 & 285.
Must have:
coils w custom spring rates
camber arms
no roll or pull
Last edited by Dimitri; 03-20-17 at 11:57 PM.