Sass

Let me know what you want, signature? Photoshop rims on a car? Clean up a background? Anything.!! i want to better my graphic designing skills


Rules

-Provide pictures the higher quality the better. (Make sure you give me good pics. For example, if you have a side view of your car where you can see your rim at a full circle, then try your best to provide a picture of rims that do the same thing.) Remember, what you give is what you get.

-Tell me what you want of course. Try to be descriptive as possible if it's something other than ''put xxx on this car.'' (Providing pics is highly recommended, especially if it's what you're looking for but on your car instead)

-Also , be patient!

94lex83457

Since I like the work you just did on the G-spider wheels would you mine scrolling down a few threads to one that is titled SC with side pipes. Like the thread says it is a concept of mine but I do not have the skills or software to do it.

Thanks again, Joe.

You can use this pic:

I think it would look better if it was lowered too (if you don't mind).

Sass

hey if you dont mind me asking, can you provide a reference of a side pipe? A picture of what it would typically look like on a car would help. From there I can do what you need, thanks. I tried googling it but there are too many different versions that I dont know which you want.

BTW here's the car lowered, if you think it needs to be a bit lower or higher I will gladly and easily change that for you


Before

After

94lex83457

Looks good, but maybe a bit higher.

As far as side pipes, if you wouldn't mind doing two it would help emensely

http://static.summitracing.com/globa...5-1hkr_w_m.jpg

http://static.summitracing.com/globa...te-h1050_m.jpg

just click on the pics to enlarge. I'll try and find more if these don't work.

Thanks again, Joe.

Sass

Well I couldn't find any pictures of those on a car so I did it to my best judgement, if I put it on wrong just let me know, these things can be easily changed, raised the car a bit also.




*take note that these may look completely different in person, but I do work to the best of my ability to correct lighting and angles if possible*

94lex83457

Other than the tip size in the second pic I think you did amazingly well considering what I gave you to work with. Lighting looks good and the ride height is great. Thanks again, and I just might have to consider side pipes as I think they look pretty dam good.

your thoughts?

TEXAS83

I got one for you... I am thinking about adding the Star Center Caps to my SC430 factory pie wheels, but my stock rims are polished silver and the Caps I found are chrome... I want to see how this combo would look. I am also considering black tint, so if you could tint the windows some, that would be great... Below are pictures of my silver SC, a pic of a blue SC with the new star caps installed, and pictures of the center caps by themselves... Thanks!

TEXAS83

some dudes car with the new chrome caps...

TEXAS83

another one of my car with a better angle

TEXAS83

one more pic of just the center cap... thanks for the help!

LXotic

I think chaplin need photoshopping with this
https://www.clublexus.com/forums/sho...d.php?t=253350

Sass

If possible, can you provide the name of those exact star caps? When i used those caps it didn't look right at all on any of those pictures, but maybe i can find a picture with the right light souce.

In my opinion, I don't believe that chrome/polished silver would work because chrome is a very reflective material.

Look at the picture of the blue SC in the garage, you can see that the front wheel doesn't have too much light source yet it is still shiney. The second picture of your car is under a grey sky and I wouldn't be able to tell that it was a polished silver because it is not very reflective. Now if you combine the two, under those light sources, one would just see a shiney star cap and it would look ''cheesy." Although you would be able to get away with it somewhat during sunny days, it just wouldn't work about 70% of the time. (For example, if someone pulls up next to you and blocks the sun from hitting your wheels)

Well here are the tints and how the pictures didn't work together, if you can provide the name or better pictures I would be glad to work with them. Also let me know if the tints % is or isn't how you wanted them

Before


I like the first side pipe better looks wise, and because it is chrome, it would match very well with your current set of rims. As for the second set of pipes, it would match better with those rims that you want.

I do prefer the style of the chrome pipes over the other one though, but it all depends what else you are going to do with your car to compliment it.

TEXAS83

ok new one for you...

my silver sc in my sig looks funny, please change it to the new pic.. thanks!

qlex56

can you please make me a signature with the iforged tein jlaudio and alpine logo
thank yo for your time
here are some pictures you can use








thanks again

snaKe

here is my try: