Post your Power figures and Mods
I thought I would start a new thread for everyone. Please post your Dyno results and mods below and everyone can use that as a guide for modding.
Ill Start 3" Exhaust from the dump to twin 2.5" Blitz ID3 boost controller running 17 psi Front mount Intake 255 in tank pump 291 ATW Hp Emanage ultimate and high flows coming soon I want around 400 hp atw |
2000 GS400
Drivetrain mods: S&S headers K&N FIPK intake w/over-sized Amsoil dry filter Borla SS axle back exhaust Apexi Neo for tuning w/custom Boomslang ecu harness TM Engineering Torque Master spark plugs B&M transmission super cooler Precision Industries Dragon high stall torque converter (2900 stall) Supra TT torsen 3.76 LSD Royal Purple fluids in engine and LSD Amsoil fluids in transmission Dyno: 4/11/09 - 281.8whp/306wtq w/245's on 16" 45 degrees Dyno: 5/15/10 - 275.4whp/287wtq w/275's on 19" 72 degrees The car was tuned even better in May '10 but yielded lower results as it was 30 degrees warmer out and I had my 19" wheels w/275's on...a very heavy setup at 63lbs each rear and 60lbs each front wheel/tire setup. I never use my 16" wheels anymore. The wheels are 2pc forged and tires are one of the heaviest but strongest out there. Bridgestone Potenza 760 Sports. Hit many crazy potholes in my day and never had any issues at all. There is a potential for me to save up to 13lbs per corner of unsprung weight should I pull the trigger on a new wheel/tire combo that I am eyeing...the results would be drastic performance-wise. |
ROck when is the SC kit being installed?
|
Originally Posted by tmf2004
(Post 8313758)
ROck when is the SC kit being installed?
|
Originally Posted by Rock-a-Lex
(Post 8314740)
March. It will be the first time in almost a decade that CL has seen this type of kit in action. Can't wait!
|
Originally Posted by PMP 300
(Post 8313551)
I thought I would start a new thread for everyone
|
1999 GS300 DWP
Everything stock except drop in K&N filter : Dyno 1: 178 rwhp Dyno 2: 174.xxx Dyno 3: 174.xxx Dyno Dynamics, Dyno Fan blower broke and car ran twice without dyno fans didnt think it would lose 4rwhp. I have my complete Aristo swap with usdm twins. Going to run that for a little then will do a single kit down the road. Will update soon. |
2003 JZS161 Aristo
565 rwhp on Dynapack hub dyno GTX3582R w .82 hotside, 264 VVTi cams, HKS Fcon V Pro, built auto trans and other supporting mods. |
very nice Evlc36
|
All times are GMT -7. The time now is 07:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands