|
2jzgte Non-vvti swap in 2gs, don't do it...
Whats up guys, I'm probably the only idiot who decides to try and do a factory style swap in a jzs160, using a jzs147 non-vvti motor swap. I'm sticking with factory side-mount (for now), and using the better 4speed auto trans... I cant tell you how bad I want to convert to manual, but I havent been working as much these days and cant spend the extra cash. Anyway, I have 95% of the swap done at this point... lets see what pics I can dig up to show you why you shouldnt do this swap in a 2gs.
All normal swap **** applies, still need to convert the fuel tank to accept fuel return.. ect.. Lets see what I have for pics.. old motor... http://i125.photobucket.com/albums/p...p/0baae1a4.jpg peace out! http://i125.photobucket.com/albums/p...p/7302ff27.jpg http://i125.photobucket.com/albums/p...p/3f96aae3.jpg cut off exhaust to keep her quiet.. :) http://i125.photobucket.com/albums/p...p/c5ed5c12.jpg time for prep! http://i125.photobucket.com/albums/p...p/7c277f8d.jpg pretty glad I removed hyrdro fans! replaced water pump with the full housing from driftmotion.com (I was able to keep the stock electric fans by cutting out the upper reservoir, otherwise the rad hose will hit it) http://i125.photobucket.com/albums/p...p/7cd2ebd8.jpg http://i125.photobucket.com/albums/p...p/33495168.jpg http://i125.photobucket.com/albums/p...p/9e950c27.jpg time to pull the old motor off the subframe. first time playing with a forklift is fun! http://i125.photobucket.com/albums/p...p/699fce57.jpg oh snap... literally. check out the motor mounts! http://i125.photobucket.com/albums/p...p/b28a07ee.jpg http://i125.photobucket.com/albums/p...p/fcfe8fd5.jpg the trans mount was working great too.. haha. how was my motor staying in the car after all those drift events?? http://i125.photobucket.com/albums/p...p/5644c74d.jpg and lets swap motor mounts and put the gte on the subframe... problem #! gen2 upper and lower motor mounts will not work. the upper mounts position the motorset crooked on subframe. we had to swap the JDM ones back on and somehow the jdm lower mount fit right into the outside holes. the 147 mounts also push everything forward about and inch and the stock twins clear fine!!!! http://i125.photobucket.com/albums/p...p/b776211e.jpg http://i125.photobucket.com/albums/p...p/f21819e0.jpg |
another tough look at the mount bs..
http://i125.photobucket.com/albums/p...p/35d4139c.jpg droppin the subframe again... http://i125.photobucket.com/albums/p...p/c6af81c8.jpg bye bye new 2gs mounts... http://i125.photobucket.com/albums/p...p/e0abc86e.jpg ahhh, much better http://i125.photobucket.com/albums/p...p/d248403d.jpg remember how I said the JDM 147 motor mounts push everything forward? http://i125.photobucket.com/albums/p...p/4e1800be.jpg well, the JDM front driveshaft is too short, gotta use the USDM one to make up for the pushing of the motor forward. http://i125.photobucket.com/albums/p...p/9bcc50a2.jpg 30mm socket to the rescue! you need to swap tailshafts, but wait... the 2nd gen tailshaft wont fit on the JDM trans, you need to use a US gen1, non-turbo tailshaft that we happened to have laying around.. well, we had a few to try from... http://i125.photobucket.com/albums/p...p/734dc244.jpg http://i125.photobucket.com/albums/p...p/c6ece30e.jpg well anyway, made a custom trans mount and everything is together fine except we also had to extend the shifter linkage an inch too. Only things I would like to get working again is the tach and water temp gauges... :/ Any help is appreciated! |
Great thread, thanks for posting.
Shoot us a picture of the transmission mount you made. |
To be honest with you, thats doesnt sound like too much work at all for a swap. Maybe a few hurdles you didnt need, but I have had much worse issues along the way with my different set ups.
good luck with it |
Yes it sucks, been there done that, I have since pulled the non vvti GTE and replaced it with the VVTI model. You are also going to lose your tach, cruise, and auto climate control. My coolant gauge didn't work either, for the motor mounts we used 2 left mounts or maybe it was 2 right mounts, I can't remember. Custom driveshaft, custom tranny mount... no fun.
The VVTI aristo motor is plug and play, everything works, I think there is one wire to re pin. So much nicer with the VVTI. |
Originally Posted by adamgamz
(Post 6911686)
Yes it sucks, been there done that, I have since pulled the non vvti GTE and replaced it with the VVTI model. You are also going to lose your tach, cruise, and auto climate control. My coolant gauge didn't work either, for the motor mounts we used 2 left mounts or maybe it was 2 right mounts, I can't remember. Custom driveshaft, custom tranny mount... no fun.
The VVTI aristo motor is plug and play, everything works, I think there is one wire to re pin. So much nicer with the VVTI. |
Yes, tranny worked perfect on aristo ecu and aristo air flow meter. I only swapped to VVTI because of engine failure. You will be good. Good luck.
|
I saw the pinouts on the ecu for the airflow meter, but my swap didnt come with one. The clip had an apexi intake and ran off straight map
|
The jdm 147's were MAP only. The USDM supra version of the non-vvti gte had a maf, but the aristo didn't receive it until the 161 VVTI.
|
sissys....lol
|
everything is good now... probably taking her for a test drive tomorrow night after installing a new fuel fitting and the walbro...
|
So, the most odd thing about the swap. My gas gauge only adjusts accurately at startup.. Not sure how I feel about that yet... haha
|
Trying to figure out why you lost climate control...
|
^ Going to answer my own question, but figured it may help some others in the future.
A/C ECU communicates more than I would have anticipated with the engine ECU. As such, both serve functions related to climate control, and w/out having both, it doesn't function. |
There's a bunch of multiplex stuff in these cars. Makes it a bit more difficult when trying to do custom stuff, but not impossible if you put some time into it.
|
| All times are GMT -7. The time now is 07:45 PM. |
© 2026 MH Sub I, LLC dba Internet Brands