cdg306

I did a little search and couldn't find anything within the past few years. I did see the thread started by MVP. Are they the only ones that build a stoker block for the 4.0/4.3? I am curious what a nice stroker block along with some worked over heads would put out.

sakataj

iTrader: (182)

no....check for lextasy and caowboy...

i think the last time i looked a good stroker motor fully assembled was in the 30k range though making about 600+ NA hp. its not cheap and IMHO more feasible to do a LS swap

cdg306

Holy *****. Yeah if they are gonna run that much I may have to look at an off brand swap. I'd rather keep it all Lexus but that is a bit pricey. Maybe I'll have to look in to doing the labor myself. I have seen used short blocks going for a few hundred.

sakataj

iTrader: (182)

here is a old thread we were talking about building motors

https://www.clublexus.com/forums/gs-...rated-1uz.html

for example here is a kit cowboy posts on another thread

JUST the stroker kit was 15k, dunno if thats shipping included or not....then u have labor to build/install

http://v-eight.com/tech_forum/viewtopic.php?f=5&t=1486

i would LOVE to have a stroker NA v8 but its just not cost efficient with the lexus motor.....

i was looking into building my heads awhile ago and it was gonna cost me like 4-5k with cams,springs,retainers,valves,head studs,etc etc...i was like um for that kind of $ i will pull it and do a LS2 swap.....so i bought my mounts from mike for the swap

https://www.clublexus.com/forums/clu...-in-stock.html


WOW....

nm...stay away from that cowboy, after looking at some old posts of his, post #20 starts the snowball....read and click on the other threads and read some more. no wonder he isnt a moderator here anymore

https://www.clublexus.com/forums/per...converter.html

cdg306

Yeah I noticed his ID was banned. Probably not be talking to him. Maybe I will drop a Coyote 5.0 in to one. =) FRPP sells the harness and computer for swaps. With a 6 speed auto it should be pretty nice.

vwynn

iTrader: (4)

anyone want a stroker kit? :3

http://ttcperformanceproducts.com/ul1u4stkit.html

price of 2x GS400s lol

cdg306

Forged pistons/rod and a big turbo is looking a lot better. lol

vwynn

iTrader: (4)

pshh. the one i linked has titanium rods

sakataj

iTrader: (182)

its ALSO the same kit i linked just on a different site....look at the pictures vince, they the same

cdg306

Titanium? Meh. I was thinking I'd use baby eagle infused unobtanium!

cdg306

Ok this is looking a little more promising. This company does have a forged option. At $7800 I wouldn't say it's a deal by any means but it's half has much as the other kits.

http://ttcperformanceproducts.com/roas.html

I am guessing the expensive part is the crank. Rods and pistons can be custom made to about any size. Still researching.....

vwynn

iTrader: (4)

yea its the same. from what i been reading n what not awhile i go i THINK cowboy might be the owner of the site that sells it?? kinda coincidental that he has all their parts maybe?

iono

vwynn

iTrader: (4)

lextreme also has pistons as well. same with luxurymods.

check em out as well! lots of $$ on the line

cdg306

I've contacted a local engine builder that specializes in Lexus/Toyota stuff. Will see if they have any ideas to keep cost down. If not I may be stuck with doing some forged internals and a pair of turbos. Will see what comes of it.

sakataj

iTrader: (182)

wait till they give u a price....im telling you will be cheaper to remove it and install a LS motor....