Notices
Performance Forced induction, intakes, exhausts, torque converters, transmissions, etc.

Help with 99 GS300 Swap

Thread Tools
 
Search this Thread
 
Old Feb 24, 2011 | 03:25 PM
  #1  
JT8BD75850's Avatar
JT8BD75850
Thread Starter
Driver School Candidate
 
Joined: Feb 2011
Posts: 1
Likes: 0
From: OH
Default Help with 99 GS300 Swap

I'm new to the forum...so excuse me if I haven't looked hard enough. I have a 99 GS300 and after researching all the different options for going turbo, I decided I think doing an Aristo vvti swap is what I want to do. Is there any reason if I find a front clip I would need anything additional? I can't find where the chassis is different besides the Aristo being a right hand drive? Any help would be greatly appreciated. Thanks
Reply
Old Feb 24, 2011 | 07:33 PM
  #2  
entryspeed's Avatar
entryspeed
Lead Lap
iTrader: (3)
 
Joined: Jul 2008
Posts: 428
Likes: 1
From: Florida
Default

with a clip you should have it all, if the tranny is different you might need a drive shaft, but they could be the same all around too! GL and have fun swaps can be patient draining events
Reply
Old Feb 25, 2011 | 07:53 AM
  #3  
amscene@ao's Avatar
amscene@ao
Driver School Candidate
 
Joined: Jun 2009
Posts: 3
Likes: 0
From: FL
Default

just did this swap

you will need a new throttle cable from toyota from a supra (about $68.00)
Reply
Old Feb 25, 2011 | 10:30 PM
  #4  
SBM2jLEX's Avatar
SBM2jLEX
Driver
 
Joined: Jan 2011
Posts: 146
Likes: 1
From: San Diego
Default

Starting to do my swap this weekend. Its best if you can get the most complete clip possible. I was able to get alot with mine..rear diff, drive shafts, axles, even the fuel pump and ps resevoir lol. The more you have the easier it will be.

And yes, you will need that supra throttle cable along with a few other things lol
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Max88
GS - 2nd Gen (1998-2005)
0
Aug 6, 2017 09:16 PM
Joshuam08
GS - 2nd Gen (1998-2005)
2
Mar 20, 2017 03:59 AM
Hutch2764
GS - 2nd Gen (1998-2005)
8
Jan 12, 2014 01:35 AM
Cannonbear
Performance
1
May 15, 2004 08:12 AM




All times are GMT -7. The time now is 02:36 AM.