ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   Performance (https://www.clublexus.com/forums/performance-186/)
-   -   2002 Won't Start After Installing Weapon*R Intake (https://www.clublexus.com/forums/performance/46519-2002-wont-start-after-installing-weapon-r-intake.html)

StylinGS300 May 4, 2002 08:28 AM

2002 GS300 Won't Start After Installing Weapon*R Intake
 
Help everyone! After I installed Weapon*R intake, my car won't start. I checked all the connection and everything is connected where they're suppose to be. I even disconnected the battery to reset the computer system and the car still won't start. Of course, I reconnected the battery. The car start up fine after I reinstall the factory intake. Any advice would be appreciated.

LexusRules May 4, 2002 08:35 AM

did you install the MAF backwards? turn it around and try again.

RacingAristo May 4, 2002 02:01 PM

Yeah, that's the mistake that most people would have. :) Did it fix your problem?

StylinGS300 May 5, 2002 07:55 AM

Thanks guys! The car starts now. This morning when I start up the GS stalled. It seem like it didn't get enough air. The engine was choking, shaking and then stall. Do I have to adjust anything? If so, what?

The GS lag between 700-1500rpm. It seem like it doesn't want to move. Any advice is appreciated.

LexusRules May 5, 2002 08:16 AM

make sure the vaccum lines are hooked up right, and then re-reset the ECU and if it still happens re-post.

StylinGS300 May 5, 2002 08:21 AM

I rechecked the vaccum hoses and it's connected correctly. I did reset the ECU. It's still lag.

RacingAristo May 5, 2002 08:59 AM

How about giving WR Tech department a call? :)

CamRen May 6, 2002 01:51 PM

one of three things:

<> everything not sealed tight... ( rubber gasket inbetween intake and sensor)
<> ECU reset for 20-30 mins then drive for 5-10 mins... it should be ok after that.
<> something wrong with the speed sensor ( dunno what though ... when i had this issue ... thats what the problem was .... thats what the lexus shop said @ least)

CSHFLW May 6, 2002 02:37 PM

It could be the wrong pipe...I got a bad one and had to send it in....is the air diffusser on the side closest the throttle body or the filter?

StylinGS300 May 7, 2002 07:39 PM

Thank you everyone for your advice. The sensor holes was welding backward and the MAF sensor was linking air. I'm sending it to Weapon*R and they'll send me another pipe. Once again thank you for all of your advice.

StylinGS300 May 7, 2002 08:32 PM


Originally posted by CamRen
one of three things:

<> everything not sealed tight... ( rubber gasket inbetween intake and sensor)
<> ECU reset for 20-30 mins then drive for 5-10 mins... it should be ok after that.
<> something wrong with the speed sensor ( dunno what though ... when i had this issue ... thats what the problem was .... thats what the lexus shop said @ least)


To reset the ECU all I have to do is disconnect the battery for 20 to 30 mins. Is that correct? The reason I ask is because I don't know much about cars. I just drive them.

LexusRules May 8, 2002 04:41 AM

disconnect the negitive

sorry about your bad experiance with WR intake.


All times are GMT -7. The time now is 03:38 PM.


© 2026 MH Sub I, LLC dba Internet Brands