Fuse box removal under dash. Sc400
02-02-19, 02:55 PM
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2018
Location: Arizona
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Fuse box removal under dash. Sc400
Im trying to relocate my harness from my wheel well to my engine bay and I can't figure out how to remove my under dash fuse box so i can remove my windshield wiper harness from it. Please help !
02-02-19, 06:34 PM
#2
Driver School Candidate
Thread Starter
Join Date: Aug 2018
Location: Arizona
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Strong crank no start
So I managed to relocate the harness above the wheel well in to the engine bay and got everything back together. But now I dont have no head lights or bright and a crank no start condition. I tested the fuel pump for voltage with my DMM and it isn't receiving any voltage from the activating relays when I switch ignition on and off.
please help
please help
02-02-19, 08:05 PM
#3
Driver School Candidate
Thread Starter
Join Date: Aug 2018
Location: Arizona
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Issue Resolved
Turns out as I was reconnecting the harness to the fuse box the white main 25 - 50 pin connector was not fully seated. This was simply my own error. But for future reference to everyone who is having issues with there car after relocating the harnes make sure and check all of your connections by removing and then reinstalling them.
Thread
Thread Starter
Forum
Replies
Last Post