Neutral Safety Switch jump sc400 w58
#1
Neutral Safety Switch jump sc400 w58
Greetings,
I'm trying to figure out which pin to jump on my w58 for my sc400 to bypass the neutral safety switch. I've read a number of threads and I'm still confused cause my harness doesn't look like any of the ones I've seen online.
I've read that a fuse will work but mine doesn't look like it can compensate a fuse lol.
Thanks I'm advance
Last edited by Deegee; 01-10-18 at 04:51 PM.
#3
Pole Position
iTrader: (7)
Before mounting the transmission... Splice and combine the BLACK and BLACK\GREY wire from the large connector that came off the auto transmission. This is the Neutral Safety Switch, and will allow your car to always act as if it were in neutral- Therefore allowing you to be able to start your car and use a manual transmission.
#4
Transmission is already mounted. I believe there is a way to jump two PINs in the larger connector like this;
https://www.clublexus.com/forums/per...rt-help-2.html
See post #27, I can't tell based off these pics which ones I need to jump.
https://www.clublexus.com/forums/per...rt-help-2.html
See post #27, I can't tell based off these pics which ones I need to jump.
#6
I have a 97 sc 300 swapped with a R154 that a shop did for me. Everything works fine but ofcourse the CEL is on. I read other threads on how to get them off. So i connected the solenoids and all of um are off except now i got a code P1780 i believe for PNP switch malfunction. Anyone know which wires im suppose to connect to correct it?
#7
Auto connector
This is what the shop did. I figured out the solid blue and solid yellow are my reverse lights. They connected the two wires in the middle to make the car start (the cut black white and the one next to it, green/orange) do anyone know which wires i have to connect to get rid of the P1780 code??
Thread
Thread Starter
Forum
Replies
Last Post